Metallics JRM62SLT 5-40 x 1 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.31
$0.31
Metallics JRM62SLT 5-40 x 1 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JRM62SLT 5-40 x 1 in. Round Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM62SLT
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.31
$0.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
5-40 x 1 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Steel Zinc Material
    • Round head with slotted Drive
    • 5-40 Diameter, 1" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Type:
Round
Fastener Length:
1
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.37 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
40
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM62SLT – Frequently Asked Questions

1) What thread size and length is the Metallics JRM62SLT machine screw?
It's a 5-40 screw, 1 inch long. The 5 is the machine screw gauge and 40 is the threads per inch, so it mates with any 5-40 tapped hole or 5-40 nut. Length is measured as 1 inch under the round head.
2) Is a round head slotted screw the right choice for mounting a device or cover plate, or should I use a flat head?
Round head sits proud of the surface, so use the JRM62SLT where the part has a plain through hole and you want bearing surface on top. If your plate or bracket has a countersunk (chamfered) hole and the head must finish flush, a flat head screw is the one you want instead, not this. Drive is a straight slot, so a flat blade driver.
3) Will these zinc plated steel screws hold up in an outdoor or damp electrical enclosure?
The JRM62SLT is carbon steel with a zinc plating, which is a dry indoor finish. It handles general indoor panel, device and enclosure work fine, but in a wet, washdown or coastal location the plating will eventually give up and you should specify stainless instead.
4) How strong is the Metallics 5-40 round head machine screw?
Rated at 60,000 psi minimum tensile, with a hardness of Rockwell B70 to B100, made from low carbon steel in the AISI 1006 to 1022 range. That's standard commercial grade material for light device, bracket and cover fastening, not a structural or high load joint.
5) Can I use the Metallics JRM62SLT on a Buy American or ARRA funded job?
It is flagged compliant for both ARRA and Buy American in the manufacturer's data, with country of origin listed as China. If your specification requires domestic melt and manufacture rather than the compliance flag, verify against the project's own procurement language before you submit it.
6) Is 1 inch too long for a standard device or box mounting hole?
Often, yes. At 1 inch the 5-40 JRM62SLT is a long screw for its gauge, suited to stacking through a spacer, standoff or thick cover. If you are only picking up a thin tapped ear, a shorter 5-40 will seat better and leave less thread hanging past the nut; Metallics lists other lengths in the same JRM round head slotted line.
7) How are the Metallics JRM 5-40 screws packaged and what is the minimum I can buy?
They come in a jar of 100, and 100 count is the order minimum. The packed jar runs 3 x 3 x 2.15 inches and weighs 0.37 lbs, so it drops straight into a van bin or a service cart drawer.
8) Do these screws come with nuts or washers?
No. The JRM62SLT is the screw only, 100 to a jar. If you are through-bolting rather than threading into a tapped hole, order 5-40 nuts and any washers separately.
How fast can I get the Metallics JRM62SLT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM62SLT come with a warranty?
Absolutely. The Metallics JRM62SLT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM62SLT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM62SLT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!