5 HOLE 1/2 INCH ROUND BOX SILVER
Manufacturer Resources
Product Specs
- Product Group:
- Electrical Boxes
- Product Type:
- Outlet box
- Product type2:
- Outlet box
- Selling Unit Of Measure:
- each
- Volume:
- 16 in³
- Department:
- Electrical
- Product Subgroup:
- Outlet Boxes
- Product Color:
- Silver
- Product Material:
- Aluminum
Red Dot S110E-R – Frequently Asked Questions
1) How many hubs does the Red Dot S110E-R round box have, and what size are they?
The S110E-R is a five-hole round outlet box with 1/2 inch hubs. That gives you four hubs around the side plus one in the back, so you can feed through, branch, or pull a corner run without adding a separate condulet. Any unused hub needs a 1/2 inch close-up plug.
2) What is the cubic-inch volume of the Red Dot S110E-R box for conductor fill?
16 cubic inches. That is the number you use when you run box fill calculations, so it will take a modest device or splice count but it is not a deep junction box. If your conductor count pushes past that, step up to a larger box rather than packing this one.
3) Will the S110E-R accept 1/2 inch rigid conduit or EMT connectors?
The hubs are 1/2 inch trade size, so standard 1/2 inch rigid, IMC, or EMT fittings thread or clamp in. For a wet location use raintight connectors; the hub size is the same either way.
4) Is the Red Dot S110E-R round box metal or plastic?
Aluminum, in a silver finish. Aluminum holds up outdoors and on exposed runs where PVC gets brittle, and being a conductive metal box the enclosure itself bonds through the hubs and grounding means rather than relying on a separate ground screw in a nonmetallic shell.
5) Does the Red Dot S110E-R come with a cover or gasket?
It is sold as a single box, each, so plan on ordering the round cover, gasket, and 1/2 inch close-up plugs separately. For an outdoor install you want a gasketed cover and plugs in every hub you are not using, or the enclosure will not stay dry.
6) Is an aluminum round box like this one suitable where I would otherwise use a cast iron box?
Aluminum is the lighter choice and resists corrosion well in most exterior and damp settings. Where it is the wrong pick is direct contact with concrete, masonry chemistry, or marine-grade salt exposure, and in agricultural settings with heavy ammonia, where a coated ferrous or PVC enclosure holds up better. For a typical exposed branch circuit or exterior fixture outlet, this aluminum box is the normal spec.
How fast can I get the Red Dot S110E-R delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Red Dot S110E-R come with a warranty?
Absolutely. The Red Dot S110E-R is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Red Dot S110E-R?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Red Dot S110E-R from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.