You may also like
5" x .045" x 7/8" Type 27 Cuto
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Sub Division:
- Electrical-E H2
- Department:
- Tools
- Product Group:
- Power Tools & Accessories
- Product Subgroup:
- Saw Blades
- Product Type:
- Cut-Off Wheel
Metallics CSW5111 – Frequently Asked Questions
1) Will the Metallics CSW5111 cut-off wheel fit a standard 5 inch angle grinder?
Yes. The CSW5111 is a 5 inch wheel with a 7/8 inch arbor hole, which is the standard spindle bushing size for 4-1/2 and 5 inch right angle grinders. If your grinder takes 5/8-11 threaded wheels rather than an unthreaded 7/8 inch hole, this is not the right wheel for it.
2) What does Type 27 mean on the Metallics CSW5111 wheel, and when should I use it instead of a flat Type 1 wheel?
Type 27 is a depressed center wheel. The hub is recessed so the flange nut sits below the cutting face, which keeps the nut clear of the work and lets you cut at a shallow angle or flush into a corner. A flat Type 1 wheel is the better choice for straight, square cut-off work in a chop saw or where you want full use of the wheel diameter. The CSW5111 is the Type 27 configuration.
3) Is the .045 inch thickness on the Metallics CSW5111 thin enough for cutting electrical conduit and threaded rod?
At .045 inch the CSW5111 is a thin cut-off wheel, the usual choice for slicing EMT, rigid conduit, all-thread, strut and light steel where you want a fast cut and minimal material loss. It is a cutting wheel, not a grinding wheel, so do not use the face of it for surface grinding or deburring.
4) What part number do I order for the Metallics 5 inch by .045 inch Type 27 cut-off wheel?
Order Metallics CSW5111. That one number covers the 5 inch diameter, .045 inch thick, 7/8 inch arbor Type 27 cut-off wheel, and it is the only configuration the model is built in.
5) Does the Metallics CSW5111 come with a bushing or backing flange for the grinder?
No. The CSW5111 is supplied as the abrasive wheel only, with the 7/8 inch center hole. You mount it on the inner and outer flanges that came with your grinder. If your tool shipped without those flanges or they are worn, source them from the grinder manufacturer before use.
How fast can I get the Metallics CSW5111 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics CSW5111 come with a warranty?
Absolutely. The Metallics CSW5111 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics CSW5111?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics CSW5111 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.