You may also like
6-1/16 to 7 Hose Clamp 18-8
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Electrical Hardware
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Conduit Clamps
Metallics HMC104SS – Frequently Asked Questions
1) What diameter range does the Metallics HMC104SS hose clamp cover?
The HMC104SS adjusts over a 6-1/16 to 7 inch clamping range, so it will close down on anything whose outside diameter falls inside that band. Below 6-1/16 inches it runs out of band travel and you need a smaller size clamp.
2) Will the HMC104SS fit 6 inch pipe?
Depends on the outside diameter, not the nominal size. The clamp spans 6-1/16 to 7 inches, so anything measuring under 6-1/16 inches across the outside will not be caught. Measure the actual OD of what you are banding (including any jacket, sleeve, or insulation under the clamp) and confirm it lands between 6-1/16 and 7 inches.
3) Is the HMC104SS clamp stainless steel, and can it go outdoors or in a damp location?
It is 18-8 stainless, the common 300 series austenitic grade used where corrosion resistance matters. That makes it suitable for wet, damp, and exterior work where a plated carbon steel clamp would rust at the band and the screw.
4) Can I use a hose clamp like the Metallics HMC104SS to strap large conduit or pipe to a support?
Yes, that is a common use for worm drive band clamps in the trades, and Metallics lists the HMC series with its conduit clamp hardware. The band wraps the conduit or pipe and the worm screw draws it tight, so it works for banding a run to a post, strut, or another pipe within the 6-1/16 to 7 inch range. It is a band clamp, not a rated conduit support strap, so for code-required conduit supports use a one-hole or two-hole strap sized to the trade size instead.
5) How many sizes or finishes of the HMC104SS do I need to choose from when ordering?
None. The HMC104SS is a single part number with no size, finish, or option choices to specify. Order it by the model and you get the 6-1/16 to 7 inch 18-8 stainless clamp.
How fast can I get the Metallics HMC104SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics HMC104SS come with a warranty?
Absolutely. The Metallics HMC104SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics HMC104SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics HMC104SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.