Metallics JFM82SS 6-32 x 1-1/2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.59
$0.59
Metallics JFM82SS 6-32 x 1-1/2 in. Flat Head Slotted Machine Screws - 18-8 Stainless - 100qty

Metallics JFM82SS 6-32 x 1-1/2 in. Flat Head Slotted Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFM82SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.59
$0.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 1-1/2 in. Flat Head Slotted Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

  • Features

    • Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance, in food processing machinery and refrigeration equipment.
    • Flat head with slotted Drive
    • 6-32 Diameter, 1-1/2" Length
    • Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
    • 18-8 Stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.069 - 0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.238 - 0.262 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.55 lbs
Product Width:
3 in
Slot Depth:
0.024 - 0.038
Slot Width:
0.039 - 0.048
Sub Division:
Electrical-E H2
Tensile Strength:
550 lb minimum
Thread Per Inch:
32
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JFM82SS – Frequently Asked Questions

1) Will a 6-32 flat head machine screw sit flush in a countersunk hole?
Yes, that is what the flat head is for. The JFM82SS head measures 0.238 to 0.262 in. across with a head height of 0.069 to 0.083 in., so it seats down into a standard 82-degree countersink and finishes flush with the surface. If you need the head to stand proud on an untapered hole, use a round or pan head instead.
2) What thread does the JFM82SS cut into, and will it match my existing tapped holes?
It is a 6-32 UNC thread, 32 threads per inch, made to ANSI/ASME B1.1. Any hole tapped 6-32, including the standard 6-32 tapped holes in steel device boxes, mud rings and fixture housings, takes it. Dimensionally the screw follows ASME B18.6.3-1998.
3) Do these Metallics stainless screws qualify for a Buy American or ARRA job?
No. The JFM82SS is not Buy American compliant and is not ARRA compliant, with multiple countries of origin. On a federally funded or domestic-content specified project, these will not satisfy the requirement.
4) Is a 6-32 x 1-1/2 in. stainless screw OK outdoors or in a wet location?
The 18-8 stainless material is specified for applications needing general atmospheric corrosion resistance, and it is used in food processing machinery and refrigeration equipment. That covers damp and washdown areas where a plain steel screw would rust. 18-8 also holds its strength better than steel at elevated operating temperatures.
5) What screwdriver do I need for the Metallics JFM82SS?
A flat blade. The drive is slotted, with a slot width of 0.039 to 0.048 in. and depth of 0.024 to 0.038 in., so a small cabinet-tip screwdriver seats properly. Shallow slots like these cam out under a power driver, so hand-drive the last turns on a finish plate.
6) What trades actually use these Metallics FM series flat head screws?
The FM and FMP series is stocked for the electrical, plumbing, and heating and air conditioning trades. Typical use is fastening plates, covers, brackets and small equipment parts into tapped 6-32 holes where a flush head and corrosion resistance both matter.
How fast can I get the Metallics JFM82SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFM82SS come with a warranty?
Absolutely. The Metallics JFM82SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFM82SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFM82SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!