Metallics JFM63SS 6-32 x 1 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.49
$0.49
Metallics JFM63SS 6-32 x 1 in. Flat Head Slotted Machine Screws - 18-8 Stainless - 100qty

Metallics JFM63SS 6-32 x 1 in. Flat Head Slotted Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFM63SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.49
$0.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 1 in. Flat Head Slotted Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

  • Features

    • Flat head with slotted Drive
    • Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
    • 6-32 Diameter, 1" Length
    • Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance, in food processing machinery and refrigeration equipment.
    • 18-8 Stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.069 - 0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.238 - 0.262 in.
Fastener Length:
1
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.392 lbs
Product Width:
3 in
Slot Depth:
0.024 - 0.038
Slot Width:
0.039 - 0.048
Sub Division:
Electrical-E H2
Tensile Strength:
550 lb minimum
Thread Per Inch:
32
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JFM63SS – Frequently Asked Questions

1) Will a 6-32 x 1 in. machine screw thread into a standard device box or switch plate tapped hole?
Yes. The Metallics JFM63SS is a 6-32 UNC screw cut to the ANSI/ASME B1.1 thread standard with 32 threads per inch, which is the thread used on outlet box, switch and receptacle mounting holes. At 1 inch long it gives extra reach for deep-set boxes or when you are stacking plaster rings and spacers behind the device.
2) Will the flat head on these 6-32 stainless screws sit flush in a countersunk hole?
It will, provided the hole is countersunk at the standard 82 degree angle for an ASME B18.6.3 flat head. The head measures 0.238 to 0.262 in. across and 0.069 to 0.083 in. high, so it seats below the surface in a properly chamfered hole. Dropped into a plain drilled hole with no countersink, the head stands proud.
3) Do these Metallics stainless screws meet Buy American or ARRA requirements on a federal job?
No. The JFM63SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic sourcing clause, this screw will not satisfy it.
4) Are these stainless machine screws OK for damp, washdown or refrigeration work?
That is what the 18-8 stainless is for. Metallics specs this screw for general atmospheric corrosion resistance and calls out food processing machinery and refrigeration equipment as typical uses. Stainless also holds its strength better than plain steel when the application runs warm.
5) How much load will a 6-32 18-8 stainless machine screw take?
Rated at 550 lb minimum tensile, with a hardness of Rockwell B85-B95. Worth knowing that there is no national performance standard for stainless machine screws, so Metallics publishes those figures as a guide rather than a certified grade. For structural or high-torque fastening, use a graded steel bolt instead.
6) How are these 6-32 screws packaged, and what is the minimum I can buy?
They ship in a jar of 100, which is also the order minimum. The packed jar weighs 0.392 lbs and measures 3 x 3 x 2.15 in., so it drops into a van bin or service cart without repacking.
7) Is a 1 inch 6-32 screw too long for mounting a device to a standard box?
Often, yes. The 1 inch length is meant for deeper stack-ups, plaster rings, spacers, or thick cover assemblies. Mounting a receptacle flat to a flush box usually wants a shorter 6-32, and the extra thread here will bottom out or sit back inside the box. Measure your stack-up before committing to the 1 inch.
8) What driver fits the slot on the Metallics JFM63SS screw?
A flat blade. The drive is slotted, with the slot running 0.039 to 0.048 in. wide and 0.024 to 0.038 in. deep, so a #1 or small #2 cabinet-tip screwdriver seats properly. A wide carpenter's blade will ride up out of the slot and cam out on stainless, which galls easily.
How fast can I get the Metallics JFM63SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFM63SS come with a warranty?
Absolutely. The Metallics JFM63SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFM63SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFM63SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!