Metallics JRMB65 6-32 x 1-1/2 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JRMB65 6-32 x 1-1/2 in. Round Head Slotted Machine Screws - Brass - 100qty

Metallics JRMB65 6-32 x 1-1/2 in. Round Head Slotted Machine Screws - Brass - Each

(No reviews yet) Write a Review

Model: JRMB65
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 1-1/2 in. Round Head Slotted Machine Screws - Brass - 100qty

  • Features

    • Round head with slotted Drive
    • Brass Material
    • 6-32 Diameter, 1-1/2" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.091 - 0.103 in.
Fastener Head Type:
Round
Fastener Head Width:
0.24 - 0.26 in.
Fastener Length:
1/1/02
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.59 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.045 - 0.073
Slot Depth:
0.051 - 0.068
Slot Width:
0.039 - 0.048
Sub Division:
Electrical-E H2
Thread Per Inch:
32
Thread Standard:
ANSI/ASME B1.1
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRMB
Product Details:
Machine Screw
Product Material:
Brass

Metallics JRMB65 – Frequently Asked Questions

1) Why choose a brass machine screw instead of steel for device or fixture mounting?
Brass is the material here, which is what you want where corrosion or a bonding/grounding path matters, in damp locations, or where the screw head stays visible on a brass or bronze cover plate. Steel is the usual choice for strength in a dry interior box; brass trades some strength for corrosion resistance and a finish that matches brass hardware.
2) How far does the round head sit above the surface, and will it clear a cover plate?
The round head stands 0.091 to 0.103 in. tall with a head diameter of 0.24 to 0.26 in. That is a domed, non-countersunk head, so it sits on top of the material rather than pulling flush. If you need the head buried in a countersunk hole or under a flat wall plate, a flat head screw is the right pick instead.
3) Does the Metallics JRMB65 brass machine screw meet a recognized dimensional spec for submittals?
It is made to ASME B18.6.3, the dimensional standard for slotted and recessed head machine screws, with threads to ANSI/ASME B1.1. Those two are what a spec writer or inspector asks for on a fastener submittal.
4) Do these brass screws qualify on a Buy American or ARRA funded job?
The JRMB65 carries both ARRA Compliant and Buy American Compliant flags in its product data, with country of origin China. Verify against the specific clause your contract cites, since those two programs are not written the same way.
5) What screwdriver fits the Metallics JRMB65, and how deep is the slot?
It takes a flat blade. The drive is a single slot measuring 0.039 to 0.048 in. wide and 0.051 to 0.068 in. deep, so a small cabinet-tip flat driver seats properly; a wide blade will ride out of the slot and chew the brass. There is no Phillips or combo recess on this screw.
6) How are these 6-32 brass screws packaged, and what is the smallest quantity I can buy?
They come in a jar, sold in a count of 100 as the order minimum. Figure roughly 0.59 lbs for the packaged jar, which is useful if you are building a kit or stocking a van shelf.
7) I need 6-32 brass screws in a different length. Is that an option?
Yes. Other sizes and quantities in the Metallics JRMB brass machine screw line are available by request; the JRMB65 itself is the 1-1/2 in. length.
How fast can I get the Metallics JRMB65 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRMB65 come with a warranty?
Absolutely. The Metallics JRMB65 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRMB65?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRMB65 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!