Metallics JSRM12 6-32 x 1-1/4 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.46
$0.46
Metallics JSRM12 6-32 x 1-1/4 in. Round Head Slotted Machine Screws - 18-8 Stainless - 100qty

Metallics JSRM12 6-32 x 1-1/4 in. Round Head Slotted Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSRM12
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.46
$0.46
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 1-1/4 in. Round Head Slotted Machine Screws - 18-8 Stainless - 100qty

  • Features

    • Round head with slotted Drive
    • 6-32 Diameter, 1-1/4" Length
    • 18-8 stainless Material

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.091 - 0.103 in.
Fastener Head Type:
Round
Fastener Head Width:
0.24 - 0.26 in.
Fastener Length:
1/1/04
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.51 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.045 - 0.073
Slot Depth:
0.051 - 0.068
Slot Width:
0.039 - 0.048
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SRM
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSRM12 – Frequently Asked Questions

1) Are these Metallics screws Buy American or ARRA compliant for a government job?
No. The JSRM12 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic-sourcing clause, this screw will not satisfy it.
2) Do machine screws like this cut their own threads, or do I need a tapped hole?
Machine screws need a mating tapped hole or a nut, they do not form their own threads. The 6-32 here is a straight machine thread at 32 TPI, so it goes into a 6-32 tapped boss, a 6-32 nut, or a factory-threaded ear on a box or bracket. If you are fastening into sheet metal with no tapping, you want a self-tapping or sheet metal screw, not this one.
3) How many 6-32 x 1-1/4 stainless machine screws come in a jar from Metallics?
They ship in a jar of 100 pieces, and 100 is the order minimum. Plan the job in hundreds rather than buying odd counts.
4) How much room does the round head take up on the surface?
The head measures 0.24 to 0.26 in. across and stands 0.091 to 0.103 in. high. So figure about a quarter inch of head diameter and a tenth of an inch of stand-off above the part you are fastening. If your hole is countersunk or the head has to finish flush, a round head is the wrong profile, use a flat head instead.
5) Is 18-8 stainless suitable for outdoor or damp locations?
18-8 is austenitic stainless and resists corrosion well in wet and washdown conditions, which is why it gets specified for exterior boxes, mechanical rooms, and damp locations where plated steel screws rust and seize. Hardness runs Rockwell B85-B95, so they drive without the head rounding out if you keep the blade seated. Keep in mind stainless galls when overdriven into stainless threads, so run them in slow.
6) What tensile strength can I count on from these stainless machine screws?
80,000 psi minimum is the figure given for the JSRM12. Note the caveat the manufacturer attaches: tensile values for stainless machine screws are approximations, because there is no single standard governing performance requirements for stainless machine screws. For a load-bearing structural connection, a graded steel fastener with a published standard is the better choice.
7) What trades use the Metallics SRM round head machine screws?
The SRM series round head machine screws are sold into the electrical, plumbing, and heating and air conditioning trades. In practice that is panel and device mounting, strap and bracket work, duct accessory attachment, and general MRO fastening where a 6-32 tapped hole is involved.
How fast can I get the Metallics JSRM12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSRM12 come with a warranty?
Absolutely. The Metallics JSRM12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSRM12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSRM12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!