Metallics JRM81SLT 6-32 x 3/4 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.23
$0.23
Metallics JRM81SLT 6-32 x 3/4 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JRM81SLT 6-32 x 3/4 in. Round Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM81SLT
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.23
$0.23
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 3/4 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

  • Features

    • Round head with slotted Drive
    • Steel Zinc Material
    • 6-32 Diameter, 3/4" Length

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.091 - 0.103 in.
Fastener Head Type:
Round
Fastener Head Width:
0.24 - 0.26 in.
Fastener Length:
4-Mar
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.34 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.045 - 0.073
Slot Depth:
0.051 - 0.068
Slot Width:
0.039 - 0.048
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM81SLT – Frequently Asked Questions

1) How much does the round head stick up, and how wide is it?
The round head on the JRM81SLT measures 0.24 to 0.26 inch across with a head height of 0.091 to 0.103 inch. That domed profile sits above the surface rather than flush, so if you need the head buried in a countersunk hole, order a flat head machine screw instead.
2) How many Metallics JRM81SLT screws come in a jar?
They ship 100 to a jar, and 100 count is the order minimum. So the smallest buy is one jar of 100 screws, weighing 0.34 lbs.
3) Are these steel screws strong enough for panel and fixture mounting?
Tensile strength is rated 60,000 psi minimum with a hardness of Rockwell B70 to B100, made from AISI 1006 to 1022 low carbon steel. That is standard commercial machine screw strength, fine for mounting devices, fixtures, plates and panel work. It is not a structural or high tensile grade fastener.
4) Can I use the JRM81SLT outdoors or in a damp location?
These are zinc plated carbon steel, which is a dry indoor finish. Zinc plating handles incidental moisture but will corrode in wet, washdown, coastal or chemical environments. For those openings use a stainless machine screw of the same 6-32 x 3/4 size.
5) Is a 3/4 inch machine screw too long for a standard device box?
It can be. A typical receptacle or switch mounts with a 1/2 inch 6-32 screw, so at 3/4 inch you get a quarter inch of extra thread. That is an advantage when the device needs to stand off a recessed box or sit over a plaster ring, but in a shallow box the surplus thread can bottom out or foul the wiring. Keep both lengths on the truck and use the 3/4 where you need the reach.
6) Do these Metallics screws qualify for a Buy American or ARRA funded project?
The record flags the JRM81SLT as compliant for both ARRA and Buy American, while country of origin is listed as China. If your specification requires domestic melt and manufacture, verify against your project's exact clause before you submit it.
How fast can I get the Metallics JRM81SLT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM81SLT come with a warranty?
Absolutely. The Metallics JRM81SLT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM81SLT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM81SLT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!