Metallics JTSF9 6 x 1-1/4 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.20
$0.20
Metallics JTSF9 6 x 1-1/4 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty

Metallics JTSF9 6 x 1-1/4 in. Flat Head Phillips Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTSF9
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.20
$0.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 1-1/4 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

  • Features

    • 6 Diameter, 1-1/4" Length
    • Flat head with Phillips Drive
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.4-1998
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.069 - 0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.238 - 0.262 in.
Fastener Length:
1/1/04
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Gaging Diameter:
0.22
Hardness:
Rockwell C28-38
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Phillips_Self_Tap.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.094
Phillips Recess Diameter:
0.168
Phillips Recess Width:
0.029
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.4 lbs
Product Width:
3 in
Protrusion Gaging Diameter:
0.021 - 0.036 Above
Screw Point Type:
Gimlet Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
ASME B18.6.4
Torsional Strength:
24 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JTSF
Product Finish:
Zinc
Product Details:
Type A Tapping Screw
Product Material:
Steel Zinc

Metallics JTSF9 – Frequently Asked Questions

1) Will a Type A tapping screw hold in sheet metal without a pilot hole or a nut?
The JTSF9 is a Type A tapping screw with a gimlet point, so it starts in thin sheet metal and forms its own thread in a pilot hole as it drives. It is not a self-drilling screw, so you still punch or drill a pilot in sheet steel. No nut or insert is needed, the sheet itself carries the thread.
2) Can these tapping screws be used on a federally funded job with domestic sourcing requirements?
No. The JTSF9 is listed as not Buy American compliant and not ARRA compliant, with country of origin reported as multiple. For a project with domestic content requirements you need a fastener line certified to that requirement instead.
3) What driver bit do I need for Metallics JTSF9 tapping screws?
A #2 Phillips bit. The JTSF9 has a Phillips recess 0.168 in. across and 0.094 in. deep, so a #2 driver seats fully; a #1 will cam out and a #3 won't bottom in the recess.
4) What thread pitch do these Metallics tapping screws have, and will they match existing screws in my panel?
18 threads per inch, cut to ASME B18.6.4, with a gaging diameter of 0.22 in. If the screws already in the enclosure are standard Type A sheet metal screws of the same size, the new ones will run in the same formed threads. Note that the #9 diameter dimensions are independent of ASME B18.6.4 even though the thread form follows it.
5) How much torque can these screws take before the head strips?
24 lb-in minimum torsional strength, with a case hardness of Rockwell C28-38. That is a hand-driver or clutched-driver fastener, not something to run down with an impact driver on full setting, which is the usual way a #6 tapping screw snaps or shears the recess.
6) Are zinc-plated steel tapping screws okay outdoors or in a damp mechanical room?
The JTSF9 is zinc-plated steel made from AISI 1016-1024 carbon steel. Zinc plating is a mild indoor and sheltered-use coating, fine for panels, enclosures, duct and interior MRO work. For wet exterior, coastal or corrosive duty, specify stainless rather than zinc-plated carbon steel.
7) How do these Metallics JTSF screws come packaged and what is the minimum I can buy?
Sold by the jar of 100, which is the order minimum. One jar weighs 0.4 lbs. Other sizes and quantities are available by request.
8) What trades actually use a 1-1/4 in. flat head Phillips tapping screw like this?
Metallics builds the JTSF series for the electrical, plumbing, heating and air conditioning trades: mounting devices and straps to sheet metal, fastening into duct and enclosure flanges, and general MRO panel work. The 1-1/4 in. length gives enough reach to pass through a strap or bracket and still form full thread in the base sheet.
How fast can I get the Metallics JTSF9 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTSF9 come with a warranty?
Absolutely. The Metallics JTSF9 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTSF9?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTSF9 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!