Metallics JFWP12SS 6 x 1-1/4 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFWP12SS 6 x 1-1/4 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

Metallics JFWP12SS 6 x 1-1/4 in. Flat Head Phillips Wood Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFWP12SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 1-1/4 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Flat Head with Phillips Drive
    • 6 Diameter, 1-1/4" Length
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Stainless wood screws are usually supplied without additional finish
    • 18-8 Stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.244 - 0.279 in.
Fastener Length:
1/1/04
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.083 - 0.106
Phillips Recess Diameter:
0.161 - 0.174
Phillips Recess Width:
0.029
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.482 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Details:
Wood Screw
Product Material:
18-8 Stainless

Metallics JFWP12SS – Frequently Asked Questions

1) What size and quantity do you get with the Metallics JFWP12SS wood screws?
The Metallics JFWP12SS is a #6 x 1-1/4 inch flat head Phillips wood screw in 18-8 stainless, sold in a jar with an order minimum of 100 pieces. Other sizes and quantities in the JFWP series are available by request.
2) Will a flat head #6 wood screw sit flush in a countersunk hole?
Yes, that is what the flat head is for. The head on the JFWP12SS runs 0.244 to 0.279 inch across with a head height of 0.083 inch, so an 82 degree countersink sized for a #6 flat head brings it level with the surface. In softwood you can often pull it flush without pre-countersinking; in hardwood or plywood, countersink it.
3) Can I use these on a federally funded job with domestic sourcing requirements?
No. The JFWP12SS screws are multi-origin sourced and are not Buy American compliant, and they are not ARRA compliant either. If your contract carries a domestic preference clause, you need a documented domestic-origin fastener instead.
4) Which Phillips bit do I need for these #6 stainless wood screws?
A #2 Phillips driver. The recess on the JFWP12SS measures 0.161 to 0.174 inch in diameter with a 0.083 to 0.106 inch depth, which is standard #2 Phillips geometry. Stainless is softer than hardened steel, so seat the bit fully and run it slow to avoid camming out and chewing the recess.
5) Are these stainless screws OK for outdoor or damp locations?
18-8 stainless is the usual pick for exterior and damp-location wood fastening, and these are supplied without any additional finish, so there is no plating to wear off and start rusting. It is also non-magnetic austenitic stainless, which matters when you are mounting near sensitive gear. For direct contact with pressure-treated lumber or coastal salt exposure, 316 stainless is the harder-duty choice.
6) Do these Metallics wood screws meet a dimensional standard for spec jobs?
Yes. Head, thread and recess dimensions conform to ASME B18.6.1, with the thread specified to ASME B18.6.1-1997. That is the standard a submittal for wood screws is normally written against, so the head width, head height and recess figures are the governed values rather than vendor approximations.
7) How much does a jar of 100 of these screws weigh for shipping or a job box?
A jar of the JFWP12SS runs 0.482 lbs. Light enough to throw several sizes in a van bin without thinking about it.
How fast can I get the Metallics JFWP12SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP12SS come with a warranty?
Absolutely. The Metallics JFWP12SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP12SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP12SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!