Metallics JTEK10P 6 x 1/2 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.17
$0.17
Metallics JTEK10P 6 x 1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 100qty

Metallics JTEK10P 6 x 1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEK10P
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.17
$0.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 100qty

  • Features

    • Pan Head with Phillips Drive
    • #2 Drill Point
    • 6 Diameter, 1/2" Length
    • Steel Zinc Material

  • Additional Notes

    • Other sizes and quantities available by request | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.087 - 0.097 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.256 - 0.27 in.
Fastener Length:
2-Jan
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C32-40
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Hd_Phil_Self-Drill_TS_Steel_and_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Panel Thickness:
0.035 - 0.090 IN
Phillips Recess Diameter:
0.159
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.25 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.055 - 0.080
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Thread Per Inch:
20
Thread Standard:
SAE J78 - 2013
Torsional Strength:
24 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEK
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEK10P – Frequently Asked Questions

1) What metal thickness can the Metallics JTEK10P self-drilling screw drill through?
The JTEK10P is rated for panel thicknesses of 0.035 to 0.090 inch, which covers typical sheet metal gauges used for duct, strut channel covers, and metal stud track. Thicker steel than 0.090 inch is outside what the #2 drill point is specified to drill, so step up to a heavier drill-point screw for structural steel.
2) Does a #6 x 1/2 in self-drilling screw need a pilot hole in sheet metal?
No pilot hole. It's a Type BSD self-drilling and tapping screw, so the drill point cuts its own hole and the 20 threads-per-inch thread taps as it goes, in one pass with a driver.
3) Can I use these screws on a federal or Buy American job?
No. The JTEK10P screws are not Buy American compliant and not ARRA compliant, with multiple countries of origin. On a project with domestic sourcing requirements you'll need a domestically manufactured drill screw instead.
4) What driver bit do I need for the Metallics JTEK10P screws?
A #2 Phillips bit. The recess is a Phillips drive with a 0.159 inch recess diameter and a gaging depth of 0.055 to 0.080 inch, so a worn or oversized bit will cam out before the screw seats.
5) How many screws come in a jar of Metallics JTEK10P?
They ship in a jar with a 100-piece minimum, and the packed jar weighs 0.25 lbs. Other sizes and quantities are available by request.
6) Will the pan head on these self-drilling screws sit flush, or does it stand proud?
Pan head, so it sits on the surface rather than countersinking. Head height runs 0.087 to 0.097 inch with a head width of 0.256 to 0.270 inch, which gives good bearing on sheet metal but means you need that clearance above the panel. For a flush surface you want a flat or wafer head instead.
7) Are Metallics JTEK10P screws OK for outdoor or damp locations?
These are steel with a zinc finish, which is a general indoor and protected-use plating. For sustained exposure to weather or washdown, use a stainless self-drilling screw rather than zinc-plated steel.
8) Will these screws snap when driven with an impact driver?
Case-hardened to Rockwell C32-40 with a 24 lb-in minimum torsional strength, so they hold up to normal powered driving. Impact drivers can still exceed that on a #6 shank once the screw bottoms out, so back off the trigger as the head seats.
9) What standards do the Metallics JTEK #6 drill screws conform to?
Head and recess dimensions follow ASME B18.6.3-2010, and the thread conforms to SAE J78-2013. Worth noting: SAE J78 does not cover #7 diameter drill screws, so a #7 substitute has no corresponding thread spec.
How fast can I get the Metallics JTEK10P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEK10P come with a warranty?
Absolutely. The Metallics JTEK10P is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEK10P?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEK10P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!