Metallics JTTS12 6 x 1/2 in. P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.24
$0.24
Metallics JTTS12 6 x 1/2 in. Pan Head Tri-Drive Tapping Screws - Steel Zinc - 100qty

Metallics JTTS12 6 x 1/2 in. Pan Head Tri-Drive Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTTS12
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.24
$0.24
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 1/2 in. Pan Head Tri-Drive Tapping Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • Pan head with slotted, Phillips and square Drive
    • Made in the USA
    • 6 Diameter, 1/2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Division:
Electrical H1
Fastener Head Type:
Pan
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Steel Zinc

Metallics JTTS12 – Frequently Asked Questions

1) What driver does the Metallics JTTS12 tri-drive screw take?
The JTTS12 head takes three drivers: a flat blade for the slot, a Phillips bit, or a square (Robertson) bit. That is what tri-drive means here, so whatever is already in the pouch will turn it. The head itself is a pan head, so it seats flat against the plate or box ear with a broad bearing surface.
2) Is a #6 x 1/2 in. tapping screw long enough for mounting device plates and box ears in sheet metal boxes?
At 1/2 inch of length under a #6 diameter, the JTTS12 is sized for thin-gauge work: sheet metal enclosures, box ears, mounting straps, and plate hardware where the screw only needs to bite through a single thickness. It is a tapping screw, so it cuts its own thread in the pre-punched hole rather than needing a nut behind it. For anything thicker than light sheet, or where you need the screw to pass through and project, you want a longer length.
3) Will zinc plated steel screws hold up in a damp or outdoor electrical enclosure?
The JTTS12 is zinc plated steel, which is a dry-location and general indoor finish. It handles the incidental moisture of a mechanical room or a garage, but for sustained wet exposure, coastal air, or direct weather, specify stainless instead. Zinc plating will eventually give up in those conditions.
4) Do I need to pre-drill or tap a hole for the JTTS12, or does it cut its own thread?
It is a thread-cutting tapping screw, so it forms its own thread in a pilot or pre-punched hole. No nut, no tapping operation. You still want a correctly sized pilot in solid stock; in factory-punched enclosure holes it goes straight in.
5) Is the pan head on this screw flush, or does it sit proud of the surface?
Pan head sits proud. It has a rounded top with a flat underside and no countersink, so it clamps on the surface rather than sinking into it. If you need the fastener flush with a finished face, you want a flat head in a countersunk hole, not this one.
6) How do Metallics JTTS12 screws come packaged?
They ship in a jar, 100 screws per jar. That is the format MRO and electrical stockrooms tend to prefer over a loose bag, since the jar stays on the shelf and the count stays honest. Handy if you are standardizing on one plate screw across a building.
7) Are Metallics JTTS12 tapping screws made in the USA?
Yes. The JTTS12 #6 x 1/2 in. pan head tri-drive tapping screw is manufactured in the USA, which matters on public and institutional jobs carrying domestic sourcing language.
How fast can I get the Metallics JTTS12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTTS12 come with a warranty?
Absolutely. The Metallics JTTS12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTTS12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTTS12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!