Metallics DWS4MD 6 x 15/8 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.33
$0.33
Metallics DWS4MD 6 x 15/8 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Fine Threads - 1000qty

Metallics DWS4MD 6 x 15/8 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Fine Threads - Each

(No reviews yet) Write a Review

Model: DWS4MD
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.33
$0.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 15/8 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Fine Threads - 1000qty

  • Additional Notes

    • Other sizes and quantities available by request | In the abscence of a single industry standard for Bugle Heads, these dimensions are offered as a guide; slight deviations are acceptable. | There is no single standard for drywall screw dimensions. These values are offered as a guide;deviations from these specifications may occur.

  • Features

    • Made in the USA
    • Bugle Head with Phillips Drive
    • Fine Threads
    • Steel Black Phosphate Material
    • 6 Diameter, 15/8" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
1000 units
Arra Compliant:
N
Buy American Compliant:
No
Country Of Origin:
United States
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.020 - 0.031 in.
Fastener Head Type:
Bugle
Fastener Head Width:
0.315 - 0.347 in.
Fastener Length:
1/5/08
Field Application:
Hardwood, Light Gauge Steel and Light Gauge Aluminum
Hardness:
Rockwell C44
Language Code:
EN
Material Standard:
AISI 1018
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Bugle_Hd_Phil_Fine_Thrd_Dry_Scr_Blk_Phos.pdf
Order Minimum Imperial:
1000
Order Minimum Uom Imperial:
TH
Pack Type:
Jar
Phillips Recess Depth:
0.106
Phillips Recess Diameter:
0.176 - 0.201
Product Group:
Fasteners
Product Height:
7.25 in
Product Length:
4.5 in
Product Weight:
4.75 lbs
Product Width:
4.5 in
Screw Point Type:
Sharp Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Spacing:
Fine
Thread Type:
UNF
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Drywall Screw
Type2:
Drywall Screw
Series:
DWS
Product Finish:
Black Phosphate
Product Details:
Drywall Screw
Product Material:
Steel Black Phosphate

Metallics DWS4MD – Frequently Asked Questions

1) Is black phosphate drywall screw finish OK for exterior or damp areas?
No. Black phosphate is a dry interior finish, it slows surface rust in storage but it is not a corrosion coating. The DWS4MD is steel black phosphate, so keep it to interior board work. For exterior sheathing, wet rooms, or anywhere exposed, go to a coated or galvanized fastener.
2) What driver bit do I need for Metallics DWS drywall screws?
A #2 Phillips. The drive is Phillips with a recess depth of 0.106 in. and a recess diameter of 0.176 to 0.201 in., which is what a standard #2 bit seats into. Keep spare bits on hand on a big board job, the recess is what wears first.
3) Will the bugle head sit flush without tearing the paper face?
That is what the bugle profile is for. The head measures 0.315 to 0.347 in. across with a head height of 0.020 to 0.031 in., so the tapered underside dimples the paper and seats below the surface for taping rather than cutting through it. Set your screw gun depth clutch so the head stops just under flush.
4) How many screws come in a jar of Metallics DWS4MD, and is there an order minimum?
They ship in a jar with a 1,000 piece order minimum, and the jar weighs 4.75 lbs. Metallics notes other sizes and quantities are available by request.
5) Are Metallics DWS drywall screws made in the USA, and do they meet Buy American requirements?
Country of origin is the United States and Metallics lists the screws as made in the USA. They are not flagged as Buy American compliant and not ARRA compliant, so if your project carries a federal domestic preference clause, verify against the specific clause before you spec them.
6) Can I use these drywall screws to fasten light gauge aluminum trim or framing?
Yes, within reason. Metallics lists the field application as hardwood, light gauge steel and light gauge aluminum, so the sharp point and fine UNF thread will take in thin aluminum. They are a board fastener, not a structural one, and the black phosphate finish rules out anything exposed to weather.
7) My spec sheet lists an exact bugle head diameter. Will the Metallics DWS4MD match it?
Close, but Metallics is explicit that there is no single industry standard for bugle head drywall screw dimensions, and publishes its figures as a guide with slight deviations acceptable. The stated head width is 0.315 to 0.347 in. and head height 0.020 to 0.031 in. If your submittal demands a hard dimensional tolerance, treat those as nominal ranges rather than fixed values.
How fast can I get the Metallics DWS4MD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics DWS4MD come with a warranty?
Absolutely. The Metallics DWS4MD is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics DWS4MD?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics DWS4MD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!