Metallics JFWP14SS 6 x 2 in. F...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFWP14SS 6 x 2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

Metallics JFWP14SS 6 x 2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFWP14SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Stainless wood screws are usually supplied without additional finish
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Flat Head with Phillips Drive
    • 18-8 Stainless Material
    • 6 Diameter, 2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.244 - 0.279 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.083 - 0.106
Phillips Recess Diameter:
0.161 - 0.174
Phillips Recess Width:
0.029
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
0.55 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Details:
Wood Screw
Product Material:
18-8 Stainless

Metallics JFWP14SS – Frequently Asked Questions

1) Do the Metallics JFWP wood screws meet a dimensional spec for submittals?
Yes. The JFWP14SS is built to ASME B18.6.1, with threads to ASME B18.6.1-1997 and 18 threads per inch at the #6 diameter. That is the governing dimension standard for wood screws, so head, recess, and thread geometry are to spec for a submittal package. Note it is listed as not Buy American compliant and not ARRA compliant, with multiple countries of origin, which matters on federally funded work.
2) What driver bit do I need for the Metallics JFWP14SS wood screws?
A #2 Phillips bit. The JFWP14SS is a Phillips drive flat head screw, and the recess runs 0.161 to 0.174 inch in diameter with a depth of 0.083 to 0.106 inch, so a #2 tip seats fully. A #1 will cam out and strip the recess in stainless.
3) Are 18-8 stainless wood screws OK for outdoor or damp locations?
18-8 stainless is the standard austenitic grade used for general corrosion resistance, which is why these come with no plating or coating on them. That makes them a reasonable pick for exterior trim, damp mechanical rooms, and coastal-adjacent work where a plain steel screw would rust out. 18-8 is not the grade specified for constant salt immersion; 316 is the step up for that.
4) How are these #6 x 2 inch stainless screws packaged, and is there a minimum order?
They ship in a jar of 100, and 100 is the order minimum. Jar weight is 0.55 lbs. Other sizes and quantities can be requested if 100 is not the count you need.
5) Do I need to pre-drill for a #6 x 2 inch stainless wood screw?
In hardwood, yes. Stainless is softer than hardened steel and a #6 shank is thin, so driving dry into oak or maple at 2 inches of depth is how you snap heads off. Pre-drill a pilot for the thread and countersink for the flat head, which runs up to 0.279 inch across. In pine or plywood you can usually drive straight with a #2 Phillips bit at moderate speed.
6) What is the difference between the JFWP stainless wood screws and the plated steel version?
Same geometry, different metal. The JFWP series stainless screws are 18-8 and come bare with no plating, relying on the alloy itself for corrosion resistance. Plated steel wood screws of the same ASME B18.6.1 dimensions are stronger in torque but the coating is the only thing protecting them, so once a driver scars it or it is cut, rust starts. Pick stainless where moisture is ongoing, plated steel for dry interior work.
How fast can I get the Metallics JFWP14SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP14SS come with a warranty?
Absolutely. The Metallics JFWP14SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP14SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP14SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!