Metallics JDWC6C 6 x 21/4 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.21
$0.21
Metallics JDWC6C 6 x 21/4 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Coarse Threads - 100qty

Metallics JDWC6C 6 x 21/4 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Coarse Threads - Each

(No reviews yet) Write a Review

Model: JDWC6C
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.21
$0.21
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 21/4 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Coarse Threads - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | In the abscence of a single industry standard for Bugle Heads, these dimensions are offered as a guide; slight deviations are acceptable. | In the abscence of a single industry standard for Deck Screws, these dimensions are offered as a guide; slight deviations are acceptable. | There is no single standard for drywall screw dimensions. These values are offered as a guide; deviations from these specifications may occur.

  • Features

    • Steel Black Phosphate Material
    • Coarse Threads
    • Bugle Head with Phillips Drive
    • 6 Diameter, 21/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.020 - 0.031 in.
Fastener Head Type:
Bugle
Fastener Head Width:
0.315 - 0.347 in.
Fastener Length:
2/1/04
Field Application:
Wood to Wood, Drywall to Wood and Cabinet Installations, Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C45-64
Language Code:
EN
Material Standard:
AISI 1018
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Bugle_Hd_Phil_Crs_Thrd_Dry_Scr_Blk_Phos.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.106
Phillips Recess Diameter:
0.176 - 0.201
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
0.7 lbs
Product Width:
3 in
Screw Point Type:
Sharp Point
Sub Division:
Electrical-E H2
Thread Per Inch:
8 to 10
Thread Spacing:
Coarse
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Drywall Screw
Type2:
Drywall Screw
Series:
JDWC and DWC
Product Finish:
Black Phosphate/Galvanized
Product Details:
Drywall Screw
Product Material:
Steel Black Phosphate

Metallics JDWC6C – Frequently Asked Questions

1) Are coarse thread drywall screws like the Metallics JDWC6C right for wood studs or metal studs?
Coarse thread is the wood stud choice. The JDWC6C runs 8 to 10 threads per inch with coarse UNC spacing and a sharp point, which bites and pulls into wood framing. Metallics lists its applications as wood to wood, drywall to wood and cabinet installations. For light gauge steel studs you want a fine thread drywall screw instead, since coarse threads strip out of sheet metal.
2) Can black phosphate drywall screws be used outdoors or in damp areas?
No. Black phosphate is an interior finish only. It gives light corrosion resistance and a surface that holds joint compound, but it is not a weather coating. Keep the JDWC6C to dry interior work and use a coated or galvanized deck or exterior screw anywhere exposed to moisture.
3) What driver bit do I need for the Metallics JDWC6C drywall screws?
A #2 Phillips bit. The head takes a Phillips drive with a recess depth of 0.106 in. and a recess diameter of 0.176 to 0.201 in., so a standard #2 tip seats fully and resists cam-out at screw gun speed.
4) Will a bugle head drywall screw countersink itself without tearing the paper face?
That is what the bugle head is for. On the JDWC6C the head measures 0.315 to 0.347 in. across with a head height of 0.020 to 0.031 in., so the curved underside pulls the board tight and dimples the paper rather than cutting through it, provided you set your gun depth stop. Metallics notes there is no single industry standard for bugle head dimensions, so slight deviations are normal.
5) Are these Metallics drywall screws hard enough that they will snap when driven into framing?
They are case hardened to Rockwell C45-64 and made from AISI 1018 steel, hard enough for the point and threads to cut wood without deforming. Hardened drywall screws do have limited shear strength, so they are for fastening board and trim, not for structural or load bearing connections.
6) Do these screws meet Buy American requirements on a federal job?
No. The JDWC6C is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your project carries a domestic sourcing clause, this screw will not satisfy it.
7) How does the Metallics JDWC6C drywall screw ship, and what is the minimum I can buy?
It comes in a jar of 100, which is also the order minimum. The filled jar weighs 0.7 lbs.
8) Can electricians and HVAC installers use these screws for mounting boxes and brackets to wood?
Yes. Metallics lists the electrical, plumbing, heating and air conditioning trades among the applications for this bugle head coarse thread screw, along with cabinet installations. The sharp point starts without a pilot hole in wood.
How fast can I get the Metallics JDWC6C delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JDWC6C come with a warranty?
Absolutely. The Metallics JDWC6C is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JDWC6C?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JDWC6C from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!