6 x 3 in. Flat Head Phillips Wood Screws - Brass - 100qty
Additional Notes
- Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread
Features
- Flat Head with Phillips Drive
- Brass Material
- 6 Diameter, 3" Length
Manufacturer Resources
Product Specs
- Minimum Purchase:
- 100 units
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Country Of Origin:
- MUL
- Dimensional Standard:
- ASME B18.6.1
- Division:
- Electrical H1
- Drive Type:
- Phillips
- Driver Size:
- #2
- Fastener Head Height:
- 0.083 in.
- Fastener Head Type:
- Flat
- Fastener Head Width:
- 0.244 - 0.279 in.
- Fastener Length:
- 3
- Field Application:
- Electrical, Plumbing, Heating, Air Conditioning Industries
- Language Code:
- EN
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- JR
- Pack Type:
- Jar
- Phillips Recess Depth:
- 0.083 - 0.106
- Phillips Recess Diameter:
- 0.161 - 0.174
- Phillips Recess Width:
- 0.029
- Product Family:
- Electrical Supplies
- Product Group:
- Fasteners
- Product Height:
- 4.57 in
- Product Length:
- 3 in
- Product Weight:
- 1.34 lbs
- Product Width:
- 3 in
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 18
- Thread Standard:
- ASME B18.6.1-1997
- Department:
- Electrical
- Product Subgroup:
- Screws
- Product Type:
- Wood Screw
- Type2:
- Wood Screw
- Series:
- JFWPB
- Product Details:
- Wood Screw
- Product Material:
- Brass
Metallics JFWPB16 – Frequently Asked Questions
1) How many Metallics JFWPB16 brass wood screws come in a jar, and can I buy fewer?
The JFWPB16 ships in a jar with a minimum order of 100 pieces. That is the pack, so it is bought by the jar rather than by the individual screw.
2) Will a #6 x 3 inch brass wood screw sit flush in a countersunk hole?
Yes. It is a flat head with a head width of 0.244 to 0.279 inch and a head height of 0.083 inch, so a standard 82 degree countersink of that diameter brings it flush or slightly below the surface.
3) Can I use these brass screws on a Buy American or ARRA-funded job?
No. The JFWPB16 is not Buy American compliant and is not ARRA compliant, with multiple countries of origin. For federally funded work with domestic-content requirements you will need a domestically sourced fastener instead.
4) How much of the Metallics JFWPB16 is threaded?
It runs 18 threads per inch, and on a 3 inch length roughly two thirds of the shank is threaded with the balance left as a smooth shoulder. That unthreaded shank is what lets the top board pull tight against the bottom one instead of jacking apart.
5) Does the Metallics JFWPB16 meet a recognized dimensional spec for wood screws?
It is built to ASME B18.6.1, with threads to ASME B18.6.1-1997. That is the standard that fixes head width, head height, and thread form for wood screws, so the head and recess will match other #6 flat head Phillips screws made to the same spec.
6) What is this #6 x 3 inch brass wood screw typically used for?
Metallics lists it for the electrical, plumbing, heating, and air conditioning trades. Practical uses are mounting boxes, straps, clamps, and covers to wood framing where a non-ferrous, corrosion-resistant screw is wanted and the head needs to sit flush.
7) How much does a jar of Metallics JFWPB16 screws weigh for shipping or shelf planning?
The jar of 100 is listed at 1.34 lbs. Handy if you are stocking a van or a storeroom bin by weight.
How fast can I get the Metallics JFWPB16 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWPB16 come with a warranty?
Absolutely. The Metallics JFWPB16 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWPB16?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWPB16 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.