Klein Tools CL200 600A AC Clam...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$156.44
$106.44
Klein Tools CL200 600A AC Clamp Meter with Temperature

Klein Tools CL200 600A AC Clamp Meter with Temperature

(No reviews yet) Write a Review

Model: CL200
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$156.44
$106.44
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
600A AC Clamp Meter with Temperature

  • Features

    • Frequency 100kHz
    • Temperature Range -4 to 1832ËšF -- Temperature is available in both Fahrenheit and Celsius
    • Diode test
    • Measures temperature, frequency and capacitance.
    • Resitance Range 40MΩ
    • Data hold
    • AC Voltage: 600V -- DC Voltage: 600V
    • AC Current: 600V
    • Capacitance 100µF
    • Audible continuity -- Loud buzzer

Manufacturer Resources

Product Specs

Department:
Electrical
Product Group:
Test & Measurement
Product Subgroup:
Environmental Meters
Product Type:
Meter Socket

Klein Tools CL200 – Frequently Asked Questions

1) Will the Klein Tools CL200 clamp meter read a 480V three-phase feeder?
No. The CL200 tops out at 600V on both AC and DC voltage, so a 480V feeder is inside range, but only for the voltage measurement itself. Current clamping is rated to 600A AC. If you are on a service larger than that, you need a higher-capacity clamp.
2) Does the Klein CL200 measure DC current, or AC only?
AC current only. The clamp jaw on the CL200 is a 600A AC clamp. It does read DC voltage to 600V, but there is no DC amperage function, so troubleshooting battery banks, solar strings, or DC motor circuits for current draw needs a different meter.
3) Can I check supply air and return air temperatures with the Klein CL200 clamp meter?
Yes, and the range is wide enough for far more than duct work: -4 to 1832 degrees F, switchable between Fahrenheit and Celsius. That covers HVAC delta-T checks at one end and flue or motor housing temperatures at the other, all from the same meter you are already using for amp draw.
4) Will the CL200 test a run capacitor on a condenser unit?
It has a capacitance function up to 100 microfarads. That handles run capacitors, which typically live in the single digits to the mid tens of microfarads. Hard start and start capacitors are usually rated well above 100uF, so those are out of range on this meter.
5) Can I use the Klein CL200 to check a VFD output or motor drive frequency?
Frequency measurement on the CL200 goes to 100kHz, well past the 60Hz line frequency and the carrier ranges a drive puts out on its output side. Bear in mind the current function is AC only, so you get frequency and voltage readings on the drive, and amp clamping on the AC side.
6) How do I take a reading with the CL200 when the display is hidden inside a panel?
Data hold freezes the reading on the display, so you clamp the conductor down in the gear, capture the value, then pull the meter out to read it. That is the function that matters most on deep panels and overhead conduit where you cannot see the screen and the jaw at the same time.
7) Is the resistance range on the Klein CL200 high enough for insulation or ground checks?
Resistance reads to 40 megohms, which covers continuity of grounding conductors and bonding paths, plus high-resistance checks on control circuits and heater elements. It is an ohmmeter range, not an insulation resistance tester, so megger-style high-voltage insulation testing is a separate instrument.
8) Does the Klein CL200 have a continuity buzzer loud enough to hear in a mechanical room?
Audible continuity is built in with a loud buzzer, which is the point of it when you are ringing out conductors on the far side of a wall or standing next to running equipment. Diode test is on the same meter for checking rectifiers and control board diodes.
9) What is the exact model number for the Klein 600A AC clamp meter with temperature?
Klein Tools CL200 is the part number to order, and it is the manufacturer part number as well, so it matches what your other suppliers and spec sheets will list. That is the 600A AC clamp with the temperature, frequency, and capacitance functions.
How fast can I get the Klein Tools CL200 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools CL200 come with a warranty?
Absolutely. The Klein Tools CL200 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools CL200?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools CL200 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!