Eaton 2/3-Pole Contactor Coil,...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$757.74
Eaton 2/3-Pole Contactor Coil, 277V Coil Voltage, 100-200A Continuous

Eaton 2/3-Pole Contactor Coil, 277V Coil Voltage, 100-200A Continuous

(No reviews yet) Write a Review

Model: CLME3C277

In Stock (leaves warehouse same day if ordered before 3pm ET)

$757.74
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Eaton 2/3-Pole Contactor Coil, 277V Coil Voltage, 100-200A Continuous

The Eaton 2/3-Pole Contactor Coil is a renewal replacement part engineered for Eaton contactors and motor starters rated for 100A and 200A continuous duty. Built for 60Hz operation at 277V coil voltage, this coil supports both 2-pole and 3-pole configurations, making it a versatile field-replacement component for maintaining reliable motor control performance in industrial and commercial control systems. As an Eaton-branded renewal part, it is designed to restore original equipment operation and long-term reliability. This 277V coil is intended for technicians and electrical contractors performing contactor renewal work, helping restore proper coil energization without replacing the entire contactor assembly.

Key Features

  • Coil Voltage: Rated for 277V operation, matching original Eaton contactor coil specifications.
  • Frequency: Designed for 60Hz AC control circuits.
  • Pole Configuration: Compatible with 2-pole and 3-pole (2,3P) contactor and starter assemblies.
  • Continuous Current Rating: Supports 100A and 200A continuous-duty contactor frames.
  • Renewal Part: Classified as a Renewal Parts/Accessories item for maintenance and repair of existing Eaton control equipment.
  • Compact Footprint: Measures approximately 6 in wide, 7.25 in deep, and 5 in high for straightforward fitment verification.
  • Application Fit: Suited for 2-pole and 3-pole contactor and starter frames rated 100A or 200A continuous.

Technical Specifications

  • Product Type: Coil
  • Coil Voltage: 277V
  • Frequency: 60Hz
  • Pole Configuration: 2,3P
  • Continuous Current Rating: 100A and 200A
  • Product Width: 6 in
  • Product Length/Depth: 7.25 in
  • Product Height: 5 in
  • Warranty: Not Applicable

Typical Applications

  • Replacement Coil for Eaton Contactors and Motor Starters
  • Motor Control Center (MCC) Maintenance and Repair
  • Industrial Motor Control Circuits
  • Commercial and Industrial Electrical Panels
  • Preventive Maintenance and Field Renewal Programs
  • Backup Stock for Critical Motor Control Equipment

Why Eaton?

Eaton renewal parts are engineered to match original equipment specifications, ensuring dependable performance when replacing coils in existing 100A and 200A continuous-duty contactors. Choosing a genuine Eaton 277V, 60Hz coil helps maintain code-compliant, reliable operation across 2-pole and 3-pole control applications. Backed by Eaton's engineering standards, this renewal coil is a practical choice for professional electrical maintenance teams.

Manufacturer Resources

Product Specs

Product Width:
6 in
Warranty:
Not Applicable
Product Length/Depth:
7.25 in
Product Height:
5 in
Product Type:
Contactor
Certifications:
Not Applicable
Department:
Electrical
Voltage Rating:
277V
Amperage Rating:
100-200A
Configuration:
2/3 Pole
Product Group:
Motor Control & Automation
Product Subgroup:
Contactors & Relays

Eaton CLME3C277 – Frequently Asked Questions

1) Will the Eaton CLME3C277 coil work on my contactor if my control circuit is 240V?
No. The CLME3C277 is a 277V, 60Hz coil, and a coil has to match the control voltage feeding it. Running it on 240V will leave it under-excited (chattering or failure to pull in), and putting it on 480V will burn it out. Match the coil voltage stamped on the coil you are pulling out before you order.
2) Does this Eaton replacement coil fit both 2-pole and 3-pole contactors?
It does. The CLME3C277 is built for 2-pole and 3-pole Eaton contactor and starter frames, so the same part number covers either configuration in the 100A to 200A continuous-duty range.
3) My Eaton contactor is a 60A frame. Is the CLME3C277 the right renewal coil?
Not for a 60A frame. This coil is specified for Eaton contactors and starters rated 100A and 200A continuous duty. Smaller frames use a physically different coil, so going by amperage rating first will save you a return. Pull the coil and read the part number if you are unsure which frame you have.
4) How much room do I need in the panel for this Eaton coil?
Allow for 6 inches wide, 7.25 inches deep and 5 inches high. That is the packaged footprint to check against the space in front of your existing contactor before you schedule the swap, particularly in a tight MCC bucket.
5) Do I have to replace the whole contactor, or can I just swap the coil?
A coil swap is the point of this part. The CLME3C277 is an Eaton renewal part, so if the contacts and frame are still serviceable and the failure is a burned or open coil, you restore the contactor without pulling the whole assembly out of the panel. If the power contacts are pitted or welded, replace the contactor instead.
6) Can I use this 277V Eaton coil on a 50Hz system?
It is specified for 60Hz AC control circuits. On 50Hz an AC coil sees lower impedance and higher current, which runs it hotter than it was rated for, so for a 50Hz installation source a coil rated for that frequency rather than using this one.
7) What is the Eaton part number for a 277V contactor coil so I can stock a spare?
Order Eaton MPN CLME3C277. One part number covers 2-pole and 3-pole frames at 100A and 200A continuous, which makes it a practical single spare to hold for motor control equipment you cannot afford to have down.
8) Where is this Eaton coil typically used?
Motor control centers, industrial motor control circuits and commercial or industrial panels, in both scheduled preventive maintenance and emergency field renewal. It is the part electrical contractors and plant maintenance teams keep on the shelf to get a 100A or 200A contactor energizing again.
How fast can I get the Eaton CLME3C277 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton CLME3C277 come with a warranty?
Absolutely. The Eaton CLME3C277 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton CLME3C277?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Eaton CLME3C277 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!