You may also like
77467 Viega ProPress tee Smart Connect technology Copper, 1-1/2'' x 1-1/2'' x 1''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x P3
- Material Type:
- Copper
- Product Dimension:
- 1-1/2'' x 1-1/2'' x 1''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 2.122"
- Product Height:
- 3.138"
- Product Weight:
- 0.836 lbs
- Product Width:
- 4.331"
- Product Material:
- Copper
Viega 77467 – Frequently Asked Questions
1) What pipe sizes does the Viega 77467 ProPress tee connect?
The Viega 77467 is a reducing copper press tee sized 1-1/2 inch x 1-1/2 inch x 1 inch. The run is 1-1/2 inch on both ends and the branch outlet is 1 inch, so you can take a 1 inch branch off a 1-1/2 inch main without adding a separate reducer.
2) Do I need a different press jaw for the 1 inch branch on the 1-1/2 inch Viega tee?
Yes. Each press end is pressed at its own size, so the 1-1/2 inch run ends and the 1 inch branch need their tooling for those respective sizes. The 1-1/2 inch ends on this reducing tee typically call for a press ring and actuator rather than a standard jaw, while the 1 inch branch presses with a 1 inch jaw.
3) Can I use the Viega 77467 ProPress tee on hard copper tube?
Yes. It is a copper-bodied ProPress fitting made for copper tube, listed with copper material and copper press ends. Size it to the nominal copper tube size: 1-1/2 inch on the run, 1 inch on the branch.
4) What is Smart Connect on this Viega press tee and why does it matter on a riser inspection?
Smart Connect is Viega's feature that lets an unpressed connection leak visibly during pressure test, so a missed joint shows up before the wall closes. On a tee like the 77467 that means three separate press joints to make, and any one you skip will weep rather than hide.
5) Is a 1-1/2 x 1-1/2 x 1 reducing press tee the right choice, or should I use a full-size tee with a reducer?
Use the reducing tee. The 77467 takes the 1 inch branch directly off the 1-1/2 inch run, so you make three press joints instead of four and you drop a coupling and a reducer out of the assembly. A full-size 1-1/2 inch tee plus a reducing bushing adds length to the branch, which matters in a packed chase given this fitting is already 4.331 inches across.
6) Is the Viega 77467 tee made in the USA?
No. The 77467 copper press tee is made in Germany. If your project carries a domestic-content or Buy American requirement, this fitting will not satisfy it.
7) What part number should I order for the Viega 1-1/2 x 1-1/2 x 1 copper press tee?
Order Viega part number 77467. That is the single manufacturer number for the copper ProPress tee in 1-1/2 inch x 1-1/2 inch x 1 inch, with no finish or seal options to specify.
How fast can I get the Viega 77467 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 77467 come with a warranty?
Absolutely. The Viega 77467 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 77467?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 77467 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.