Metallics JFMP88SS 8-32 x 1-1/...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.49
$0.49
Metallics JFMP88SS 8-32 x 1-1/2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JFMP88SS 8-32 x 1-1/2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFMP88SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.49
$0.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 1-1/2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • 18-8 Stainless Material
    • Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
    • Flat head with Phillips Drive
    • 8-32 Diameter, 1-1/2" Length
    • Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance, in food processing machinery and refrigeration equipment.

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.084 - 0.1 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.285 - 0.312 in.
Fastener Length:
1/1/02
Gaging Diameter:
0.267
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.11
Phillips Recess Diameter:
0.182
Phillips Recess Width:
0.03
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
0.73 lbs
Product Width:
3 in
Protrusion Gaging Diameter:
0.023 - 0.039 Above
Sub Division:
Electrical-E H2
Tensile Strength:
850 lb minimum
Thread Per Inch:
32
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JFMP88SS – Frequently Asked Questions

1) Are these stainless screws OK for outdoor, damp, or food plant work?
18-8 stainless is the usual pick for general atmospheric corrosion resistance, and this material is specified for food processing machinery and refrigeration equipment as well. It also holds its strength better than plain steel when the application runs warm. For constant salt spray or chlorinated washdown, 316 stainless is the step up.
2) Is a machine screw the right choice here, or do I need a self-tapping or sheet metal screw?
A machine screw like the JFMP88SS has a straight, fully formed 8-32 UNC thread and no point, so it needs a pre-tapped hole or a nut. It will not cut its own thread in sheet steel or drywall. Use it for device boxes, panel covers, equipment brackets and anywhere there is an existing 8-32 tapped hole; reach for a self-drilling or sheet metal screw when the hole is untapped.
3) What size Phillips bit drives these without camming out?
A #2 Phillips. The recess is 0.182 in. in diameter and 0.11 in. deep, which is a #2 profile, so a #1 bit will spin in the recess and chew it up. Stainless galls more easily than plated steel, so keep the bit seated and the speed down.
4) How much load will an 8-32 stainless machine screw take?
Minimum tensile strength is 850 lb, with hardness at Rockwell B85-B95. Note that hardness and tensile figures for stainless machine screws are guides only, since there is no national performance standard for them. Dimensionally the screw is held to ASME B18.6.3-1998 with SAE material grading, so the geometry is to spec even though the strength numbers are advisory.
5) Do these 8-32 x 1-1/2 screws meet Buy American and ARRA requirements for a government job?
The JFMP88SS carries both ARRA Compliant and Buy American Compliant flags in its product data, with country of origin listed as China. If your specification has a domestic melt-and-manufacture clause, verify which compliance pathway your project is using before you submit.
6) How are these sold, loose or in a package, and is there a minimum?
They come in a jar, with a minimum order of 100 count. That makes it a shop or truck-stock item rather than a single-screw buy, which is how most electricians and maintenance crews want 8-32 hardware. Metallics lists other sizes and quantities in the FM and FMP series by request.
7) What does a jar of these 8-32 x 1-1/2 stainless screws weigh and how much shelf space does it take?
Listed product weight is 0.73 lbs, in a container measuring 3 in. length by 3 in. width by 2.7 in. height. Small enough to keep several thread sizes together in a parts bin on the van.
How fast can I get the Metallics JFMP88SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFMP88SS come with a warranty?
Absolutely. The Metallics JFMP88SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFMP88SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFMP88SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!