Metallics JFMP89SS 8-32 x 2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.61
$0.61
Metallics JFMP89SS 8-32 x 2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JFMP89SS 8-32 x 2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFMP89SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.61
$0.61
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

  • Features

    • Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
    • 8-32 Diameter, 2" Length
    • Flat head with Phillips Drive
    • Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance, in food processing machinery and refrigeration equipment.
    • 18-8 Stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.084 - 0.1 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.285 - 0.312 in.
Fastener Length:
2
Gaging Diameter:
0.267
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.11
Phillips Recess Diameter:
0.182
Phillips Recess Width:
0.03
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.1 lbs
Product Width:
3 in
Protrusion Gaging Diameter:
0.023 - 0.039 Above
Sub Division:
Electrical-E H2
Tensile Strength:
850 lb minimum
Thread Per Inch:
32
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JFMP89SS – Frequently Asked Questions

1) Does the flat head on these 8-32 screws sit flush in a countersunk hole?
Yes. These are true flat head screws with a countersunk profile, head width 0.285 to 0.312 in. and head height 0.084 to 0.1 in., built to ASME B18.6.3-1998. In a matching 82 degree countersink the head finishes flush with the surface, so nothing protrudes to catch a plate or panel laid over it. If your hole is not countersunk, the head will stand proud by roughly its head height and you want a pan or round head instead.
2) What size Phillips driver do I need for these Metallics 8-32 machine screws?
A #2 Phillips. The recess measures 0.182 in. diameter, 0.11 in. deep and 0.03 in. wide, which is the standard #2 geometry. Using a #1 will cam out and chew the recess; a #3 will not seat.
3) Are these stainless machine screws suitable for outdoor, washdown or refrigeration use?
18-8 stainless is the material here, which is what you reach for when you need general atmospheric corrosion resistance: exterior boxes, food processing machinery, refrigeration equipment and damp mechanical rooms. Stainless also holds its strength better than plated steel as operating temperature rises. For plain dry interior work, a zinc plated steel machine screw does the same mechanical job for less.
4) Is the Metallics JFMP89SS sold individually or do I have to buy a full jar?
It ships as a jar of 100, and 100 count is the order minimum, so this is a full-jar purchase rather than loose pieces. Jar weight is 1.1 lbs. For a service van that is a sensible stocking quantity for a long 8-32; for a single repair it is more than you need.
5) What is the difference between a machine screw like this and a self-tapping or sheet metal screw?
A machine screw has a uniform 8-32 UNC machine thread with a blunt end, meant to go into an already tapped hole or to be run through a hole and captured with a nut. It will not cut its own thread in sheet metal. If you are fastening into untapped sheet or into a pilot hole in wood, you want a sheet metal or self-drilling screw instead. This one is for tapped device boxes, fixture housings, panel hardware and nut-and-screw assemblies.
6) Do these Metallics machine screws meet Buy American or ARRA requirements on a government job?
The JFMP89SS is flagged compliant for both Buy American and ARRA in Metallics' own data, while country of origin is listed as China. On a federally funded project where the specification demands domestic melt and manufacture, confirm which compliance basis your contract uses before you submit these.
How fast can I get the Metallics JFMP89SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFMP89SS come with a warranty?
Absolutely. The Metallics JFMP89SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFMP89SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFMP89SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!