Metallics JTRM88 8-32 x 1-1/2 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.43
$0.43
Metallics JTRM88 8-32 x 1-1/2 in. Round Head Tri-Drive Machine Screws - Steel Zinc - 100qty

Metallics JTRM88 8-32 x 1-1/2 in. Round Head Tri-Drive Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTRM88
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.43
$0.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 1-1/2 in. Round Head Tri-Drive Machine Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • 8-32 Diameter, 1-1/2" Length
    • Made in the USA
    • Round head with slotted, Phillips and square Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Division:
Electrical H1
Fastener Head Type:
Round
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Steel Zinc

Metallics JTRM88 – Frequently Asked Questions

1) What drivers will fit the Metallics JTRM88 tri-drive machine screw head?
The JTRM88 round head is a tri-drive, so the same screw takes a flat blade, a Phillips bit, or a square (Robertson) bit. On a panel or device box where you are working one-handed, that means you drive it with whatever is already in the pouch instead of switching bits.
2) Will an 8-32 x 1-1/2 in. machine screw work for mounting devices in an electrical box?
8-32 is the standard machine thread for receptacle, switch, and cover mounting in steel device boxes, and the JTRM88 runs that thread at a 1-1/2 inch length. The long shank is for deep-set boxes, thick plaster rings, or stacked spacers where the short factory screw from the device runs out of thread.
3) Is the JTRM88 screw a machine screw or a self-tapping sheet metal screw?
It is a machine screw. The 8-32 thread is a uniform machine thread that goes into a tapped hole or a nut, not into bare sheet metal. If you need the screw to cut its own thread in unprepped metal, a machine screw is the wrong fastener for that hole.
4) Are zinc plated steel screws OK for outdoor or damp electrical work?
The JTRM88 is zinc plated steel. Zinc plating handles indoor and protected locations fine, but it is a sacrificial coating, so for direct weather exposure, wet locations, or coastal air you want stainless rather than zinc plated steel.
5) How do Metallics JTRM88 screws come packaged for shop stock?
They ship in a jar, 100 screws per jar. That is a sensible MRO or van-stock quantity for 8-32 device screws, and the jar keeps them sorted on a shelf instead of loose in a bin.
6) Are the Metallics 8-32 tri-drive machine screws made in the USA?
Yes. The JTRM88 8-32 x 1-1/2 inch round head tri-drive machine screw is made in the USA, which matters on public and institutional jobs carrying domestic sourcing requirements.
7) Why pick a round head screw over a flat or pan head for panel work?
The round head on the JTRM88 sits proud of the surface with a domed crown, so it bears on the face of the part rather than needing a countersunk hole. Use a flat head instead when the fastener has to finish flush with the surface.
How fast can I get the Metallics JTRM88 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTRM88 come with a warranty?
Absolutely. The Metallics JTRM88 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTRM88?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTRM88 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!