Metallics JFMP87SS 8-32 x 1-1/...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFMP87SS 8-32 x 1-1/4 in. Flat Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JFMP87SS 8-32 x 1-1/4 in. Flat Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFMP87SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 1-1/4 in. Flat Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • Flat head with Phillips Drive
    • Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
    • 8-32 Diameter, 1-1/4" Length
    • 18-8 Stainless Material
    • Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance, in food processing machinery and refrigeration equipment.

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.084 - 0.1 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.285 - 0.312 in.
Fastener Length:
1/1/04
Gaging Diameter:
0.267
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.11
Phillips Recess Diameter:
0.182
Phillips Recess Width:
0.03
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.66 lbs
Product Width:
3 in
Protrusion Gaging Diameter:
0.023 - 0.039 Above
Sub Division:
Electrical-E H2
Tensile Strength:
850 lb minimum
Thread Per Inch:
32
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JFMP87SS – Frequently Asked Questions

1) How many screws come in a jar of Metallics JFMP87SS 8-32 machine screws?
The JFMP87SS ships as a jar of 100 screws, and 100 count is the order minimum. If you need a different count or a different length in the FM/FMP series, other sizes and quantities are available by request.
2) Will 8-32 flat head screws thread into a standard device box or plaster ring?
8-32 is the standard machine screw thread used for mounting wiring devices and plates to boxes, and the JFMP87SS is cut 32 threads per inch to UNC, per ANSI/ASME B1.1. At 1-1/4 inch long it gives extra reach where the device sits forward of the box, such as through a thick plaster ring or an adapter.
3) Can I use these screws on a Buy American or ARRA funded project?
Metallics lists the JFMP87SS as both ARRA compliant and Buy American compliant. Country of origin is China. If your contract specification requires domestic melt and manufacture rather than Buy America(n) Act compliance as the manufacturer applies it, confirm the clause against your project documents before submitting.
4) What size Phillips driver fits these 8-32 flat head machine screws?
A #2 Phillips. The recess on the JFMP87SS measures 0.182 in. diameter and 0.11 in. deep, which is a #2 bit profile. Driving it with a #1 will cam out and a #3 will not seat.
5) Are 18-8 stainless machine screws strong enough, or should I use steel?
The 18-8 stainless JFMP87SS is rated 850 lb minimum tensile with a hardness of Rockwell B85-B95. That is a corrosion-first choice rather than a high-strength one, so pick it for damp, washdown, food processing or refrigeration work and for applications that see some elevated operating temperature. For a structural, high-load joint, a hardened alloy steel screw is the better fit.
6) Do these Metallics stainless screws meet a recognized dimensional spec for submittals?
Yes. The JFMP87SS is made to ASME B18.6.3-1998 for dimensions and ANSI/ASME B1.1 for threads, with SAE as the material standard, so head and thread geometry are to spec. Note that Metallics states hardness and tensile figures for stainless machine screws are guides only, since no national performance standard exists for them.
7) Will stainless screws cause a galvanic problem in a steel box or on aluminum?
18-8 stainless is noble relative to plain steel, galvanized and aluminum, so in a wet or outdoor location the less noble material corrodes first at the joint. In dry interior work it is a non-issue, and the 18-8 is picked for general atmospheric corrosion resistance. For damp exterior assemblies on aluminum, isolate the fastener or match the material.
8) How much does a jar of 100 of these 8-32 x 1-1/4 screws weigh?
0.66 lbs for the jar. The container itself measures 3 in. by 3 in. by 2.15 in., which matters if you are kitting these into a van bin or a job box.
How fast can I get the Metallics JFMP87SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFMP87SS come with a warranty?
Absolutely. The Metallics JFMP87SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFMP87SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFMP87SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!