Metallics JRM89SLT 8-32 x 2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.27
$0.27
Metallics JRM89SLT 8-32 x 2 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JRM89SLT 8-32 x 2 in. Round Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM89SLT
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.27
$0.27
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 2 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Round head with slotted Drive
    • Steel Zinc Material
    • 8-32 Diameter, 2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.107 - 0.12 in.
Fastener Head Type:
Round
Fastener Head Width:
0.287 - 0.309 in.
Fastener Length:
2
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.08 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.064 - 0.090
Slot Depth:
0.058 - 0.077
Slot Width:
0.045 - 0.054
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM89SLT – Frequently Asked Questions

1) Are these zinc machine screws okay outdoors or in damp locations?
They are carbon steel with a zinc plating, which is a mild indoor corrosion coating. Fine for interior boxes, panels, enclosures and dry mechanical rooms. For exterior, wash-down, coastal, or wet-location work the zinc will bloom and rust, so specify a stainless 8-32 instead.
2) How strong is a Metallics JRM 8-32 machine screw?
Minimum tensile strength is 60,000 psi, with hardness in the Rockwell B70 to B100 range, made from AISI 1006 to 1022 low carbon steel. That is standard commercial-grade machine screw material, suited to device mounting, cover plates, enclosure hardware and light bracketry, not to structural or high-load bolted joints.
3) Do these screws qualify for a Buy American or ARRA-funded project?
Metallics flags the JRM89SLT as ARRA compliant and Buy American compliant, with country of origin listed as China. If your specification requires domestic melt and manufacture rather than the compliance flag, confirm that against the project language before you submit it.
4) Round head or pan head for mounting a device in an electrical box?
A round head like the JRM89SLT has a domed crown and a smaller bearing diameter, 0.287 to 0.309 inch, so it stands proud of the surface. That is fine behind a cover plate or inside an enclosure. Where the screw head has to sit low under a flush plate or inside a tight recess, a pan head with its flatter top and wider bearing face is the better call, and a flat head is what you want when the hole is countersunk.
5) How are these sold, loose or in a box, and what is the minimum I can order?
The JRM89SLT ships in a jar of 100 pieces, and 100 count is the order minimum. Total packed weight is 1.08 lbs. It is a shop-stock jar rather than a bulk carton, so it is sized for a van or a maintenance bench.
6) Do I need to tap a hole for these, or will they cut their own threads?
These are machine screws, not self-tapping. The 8-32 thread needs a pre-tapped hole or a nut. For a tapped hole in sheet steel, drill a #29 and tap 8-32; through a clearance hole, use a #8-32 hex nut on the back side.
How fast can I get the Metallics JRM89SLT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM89SLT come with a warranty?
Absolutely. The Metallics JRM89SLT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM89SLT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM89SLT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!