Metallics JRM136SLT 8-32 x 5/8...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.23
$0.23
Metallics JRM136SLT 8-32 x 5/8 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JRM136SLT 8-32 x 5/8 in. Round Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM136SLT
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.23
$0.23
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 5/8 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • Round head with slotted Drive
    • 8-32 Diameter, 5/8" Length

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.107 - 0.12 in.
Fastener Head Type:
Round
Fastener Head Width:
0.287 - 0.309 in.
Fastener Length:
8-May
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.45 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.064 - 0.090
Slot Depth:
0.058 - 0.077
Slot Width:
0.045 - 0.054
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM136SLT – Frequently Asked Questions

1) Will the round head sit flush, or does it stand above the surface?
It stands above. A round head has a domed top and a flat bearing underside, so it seats on the surface rather than sinking in. Head height runs 0.107 to 0.12 in. and head diameter 0.287 to 0.309 in., so plan for about an eighth of an inch of standoff. If you need the head buried, use a flat head screw in a countersunk hole instead.
2) Are zinc plated steel machine screws OK outdoors or in damp locations?
Zinc plating on carbon steel is a mild corrosion coating meant for dry interior service. It will handle occasional humidity, but in wet locations, exterior boxes, coastal air, or anywhere washdown chemicals reach it, the plating gives up and the screw rusts. Specify stainless 8-32 machine screws for those openings.
3) Do these 8-32 screws need a nut, or do they thread into tapped holes?
Machine screws carry a straight, fully formed 32 threads per inch machine thread, so they go into a tapped hole or take a nut. They are not self tapping and will not hold in a drilled hole in sheet metal or in wood. For a nut, match it to 8-32.
4) Is the Metallics JRM136SLT Buy American and ARRA compliant for a government or institutional job?
The JRM136SLT is flagged compliant on both Buy American and ARRA. Country of origin is China, so if your spec enforces domestic melt and manufacture rather than the ARRA/Buy American compliance flag, verify against the project's exact clause before you submit it.
5) How many 8-32 x 5/8 round head machine screws come in a pack?
They ship 100 to a jar, which is the minimum order quantity. Handy for a service van or a shop drawer rather than a one-off repair.
6) How strong are these screws, and what steel are they made from?
Minimum tensile strength is 60,000 psi, with a hardness of Rockwell B70 to B100, made from AISI 1006 to 1022 low carbon steel. That is standard commercial machine screw strength, fine for device mounting, panel hardware, plates, and brackets. It is not a structural fastener, so do not substitute one into a load path that calls for a graded bolt.
7) How much does a jar of 100 of these 8-32 screws weigh?
About 0.45 lbs per jar, with the container measuring 3 in. by 3 in. by 2.15 in. Small enough to keep several lengths side by side in a van bin.
How fast can I get the Metallics JRM136SLT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM136SLT come with a warranty?
Absolutely. The Metallics JRM136SLT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM136SLT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM136SLT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!