Metallics JRM112SLT 8-32 x 21/...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.29
$0.29
Metallics JRM112SLT 8-32 x 21/4 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JRM112SLT 8-32 x 21/4 in. Round Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM112SLT
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.29
$0.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 21/4 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

  • Features

    • Round head with slotted Drive
    • 8-32 Diameter, 21/4" Length
    • Steel Zinc Material

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.107 - 0.12 in.
Fastener Head Type:
Round
Fastener Head Width:
0.287 - 0.309 in.
Fastener Length:
2/1/04
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.17 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.064 - 0.090
Slot Depth:
0.058 - 0.077
Slot Width:
0.045 - 0.054
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM112SLT – Frequently Asked Questions

1) Is a slotted round head screw the right choice, or should I use a combination/Phillips head?
The JRM112SLT has a round head with a slotted drive only, with slot width 0.045 to 0.054 in. and slot depth 0.058 to 0.077 in. Slotted is what most electrical device and cover plate screws use, and it drives fine with a standard flat blade. If your crew runs Phillips or square bits off a driver, a combination head screw is the better pick, since a slot this narrow cams a flat blade out under power driving.
2) Are these zinc plated steel screws OK for outdoor or damp locations?
These are steel with a zinc finish, made from AISI 1006 to 1022 low carbon steel. Zinc plating handles dry interior work and normal box and panel use, but it is a sacrificial coating and will corrode in wet, exterior, or washdown locations. For those, specify a stainless 8-32 round head slotted screw instead.
3) How strong is the JRM112SLT, and can I torque it down hard?
Tensile strength is 60,000 psi minimum with a hardness of Rockwell B70 to B100. That is standard low carbon steel machine screw strength, fine for mounting devices, plates, brackets, and enclosure hardware. It is not a grade 5 or grade 8 cap screw, so do not substitute it into a structural or high torque joint.
4) Do I have to buy these Metallics screws in bulk, and how do they ship?
The JRM112SLT comes in a jar of 100, with an order minimum of 100 count. That jar weighs 1.17 lbs. Practical for a shop or MRO stockroom running a standing 8-32 bin rather than someone needing two screws.
5) Do these Metallics screws meet Buy American or ARRA requirements on a public project?
The record flags the JRM112SLT as compliant for both ARRA and Buy American, with country of origin China. On a federally funded job where domestic sourcing is enforced, verify against your project's specific clause, since origin and compliance flags are not the same test.
How fast can I get the Metallics JRM112SLT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM112SLT come with a warranty?
Absolutely. The Metallics JRM112SLT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM112SLT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM112SLT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!