Metallics JTEKD15SS 8 x 1-1/2 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.97
$1.70
Metallics JTEKD15SS 8 x 1-1/2 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - 410 Stainless Steel - 100qty

Metallics JTEKD15SS 8 x 1-1/2 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - 410 Stainless Steel - Each

(No reviews yet) Write a Review

Model: JTEKD15SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.97
$1.70
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1-1/2 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - 410 Stainless Steel - 100qty

  • Features

    • 410 Stainless Steel Material
    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
    • 1/4 Indented Hex Head with Hex Drive
    • #2 Drill Point
    • 8 Diameter, 1-1/2" Length

  • Additional Notes

    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Hex
Fastener Head Height:
0.096 - 0.11 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.244 - 0.25 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C38-46
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Panel Thickness:
0.035 - 0.100 IN
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.78 lbs
Product Width:
3 in
Remarks:
The catalog UPC differ from the tarnsaction daat spreadsheet UPC
Screw Point Type:
Drill Point
Slot Depth:
0.052 - 0.066
Slot Width:
0.045 - 0.054
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
SAE J78 - 2013
Torsional Strength:
42 lb-in minimum
Washer Od:
0.322 - 0.348 in.
Washer Thickness:
0.019 - 0.031 IN
Width Across Corners:
0.272
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEKD
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
410 Stainless Steel

Metallics JTEKD15SS – Frequently Asked Questions

1) Is this a Buy American or ARRA compliant fastener for a government job?
No. The JTEKD15SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your spec carries a domestic sourcing requirement, this screw will not satisfy it.
2) Will a #8 stainless self-drilling screw hold up outdoors or in a damp mechanical room?
The JTEKD15SS is made from 410 stainless steel, which is the hardenable stainless used for self-drillers because it can be heat treated hard enough to cut its own hole. It resists corrosion far better than plain or zinc plated carbon steel in damp interiors, rooftop and exterior sheet metal work. Note 410 is a martensitic stainless, so it is less corrosion resistant than 300 series stainless in chloride heavy or coastal environments.
3) What driver do I need for the Metallics JTEKD15SS hex head screw?
A 1/4 inch hex driver or nutsetter. The head is an indented hex with hex drive, measuring 0.244 to 0.25 inches across the flats and 0.272 across the corners, so a standard 1/4 inch magnetic nutsetter in an impact or screw gun seats it. No bit tip is involved.
4) Does this screw have a built in washer, or do I need to add one?
The washer is integral to the head, so nothing extra to order. Washer outside diameter runs 0.322 to 0.348 inches with a thickness of 0.019 to 0.031 inches. That bearing surface spreads load over sheet metal and helps keep thin panel from dimpling or pulling through.
5) Will this screw snap off when I drive it with an impact driver?
Torsional strength is 42 lb-in minimum with a case hardness of Rockwell C38-46. Per the product data, minimum torques are the same for stainless and carbon steel self-drill screws, and drill time is about 2.5 seconds through a 1 mm plate. Drive it at moderate speed with steady pressure; running a high torque impact past seating is what shears heads, not the screw rating.
6) How is the Metallics JTEKD15SS packaged and what is the minimum I can buy?
It ships in a jar of 100 pieces, and 100 is the order minimum. One jar weighs 0.78 lbs.
7) How far does the hex head stand off the surface?
Head height on the JTEKD15SS runs 0.096 to 0.11 inches, measured with the integral washer face as the bearing surface. Low enough that it will not interfere with most cover plates or adjacent equipment, but it is not a flush or countersunk head, so do not plan on a flat finished surface over it.
How fast can I get the Metallics JTEKD15SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKD15SS come with a warranty?
Absolutely. The Metallics JTEKD15SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKD15SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKD15SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!