Metallics JTEKD114SS 8 x 1-1/4...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.81
$1.70
Metallics JTEKD114SS 8 x 1-1/4 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - 410 Stainless Steel - 100qty

Metallics JTEKD114SS 8 x 1-1/4 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - 410 Stainless Steel - Each

(No reviews yet) Write a Review

Model: JTEKD114SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.81
$1.70
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1-1/4 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - 410 Stainless Steel - 100qty

  • Features

    • 1/4 Indented Hex Head with Hex Drive
    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
    • 8 Diameter, 1-1/4" Length
    • 410 Stainless Steel Material
    • #2 Drill Point

  • Additional Notes

    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Hex
Fastener Head Height:
0.096 - 0.11 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.244 - 0.25 in.
Fastener Length:
1/1/04
Hardness:
Rockwell C38-46
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Panel Thickness:
0.035 - 0.100 IN
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.36 lbs
Product Width:
3 in
Screw Point Type:
Drill Point
Slot Depth:
0.052 - 0.066
Slot Width:
0.045 - 0.054
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
SAE J78 - 2013
Torsional Strength:
42 lb-in minimum
Washer Od:
0.322 - 0.348 in.
Washer Thickness:
0.019 - 0.031 IN
Width Across Corners:
0.272
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEKD
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
410 Stainless Steel

Metallics JTEKD114SS – Frequently Asked Questions

1) How thick a metal panel will the Metallics JTEKD114SS self-drilling screw go through?
The #2 drill point on the JTEKD114SS is rated for panel thickness of 0.035 to 0.100 in. That covers typical light-gauge steel studs, strut, hat channel and sheet metal. Thicker structural steel needs a heavier drill point, not this one.
2) What thread pitch is a #8 Type BSD self-drilling screw, and will it hold in light gauge steel?
18 threads per inch on a #8 diameter, 1-1/4 in. long Type BSD self-drilling and tapping screw. The screw drills and forms its own threads in one pass, so it holds in steel from 0.035 to 0.100 in. thick without a pilot hole or a nut on the back side.
3) What size driver do I need for a 1/4 indented hex head self-drilling screw?
A 1/4 in. hex driver or nutsetter. The indented hex head measures 0.244 to 0.25 in. across the flats and 0.272 across the corners, with a head height of 0.096 to 0.11 in. It is a hex drive, so no bit tip is involved.
4) Is a 410 stainless self-drilling screw okay for outdoor or damp locations?
The JTEKD114SS is 410 stainless steel, a hardenable martensitic stainless, which is what lets a stainless screw drill its own hole and still hold Rockwell C38-46 hardness. It resists corrosion better than plain carbon steel, but 410 is not as corrosion resistant as 300 series stainless, so for coastal or chemical exposure spec a 300 series fastener instead.
5) Does this screw come with a sealing washer or just a plain washer?
It is a washer head style screw: the washer OD runs 0.322 to 0.348 in. with a washer thickness of 0.019 to 0.031 in. That is a bearing washer that spreads load on thin sheet, not a bonded EPDM sealing washer. For a weather-tight roof or wall panel penetration you want a screw with a bonded neoprene washer.
6) What standards does the Metallics JTEKD self-drilling screw meet for a submittal?
Threads are to SAE J78 - 2013 and head dimensions to ASME B18.6.3-2010, with 42 lb-in minimum torsional strength. Note that SAE J78 does not cover #7 diameter drill screws. It is flagged both ARRA compliant and Buy American compliant, with country of origin China.
7) How many Metallics JTEKD114SS screws come in a pack?
They ship in a jar with an order minimum of 100 count. Total pack weight is 0.36 lbs.
8) How long does it take to drive a stainless self-drilling screw compared to a steel one?
No practical difference in drive torque. Minimum torque requirements are the same for stainless and steel self-drill screws, and drill time is about 2.5 seconds through a 1 mm thick plate.
How fast can I get the Metallics JTEKD114SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKD114SS come with a warranty?
Absolutely. The Metallics JTEKD114SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKD114SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKD114SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!