Metallics JTEKD15 8 x 1-1/2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.27
$0.27
Metallics JTEKD15 8 x 1-1/2 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 100qty

Metallics JTEKD15 8 x 1-1/2 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEKD15
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.27
$0.27
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1-1/2 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 100qty

  • Features

    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
    • Steel Zinc Material
    • 1/4 Indented Hex Head with Hex Drive
    • #2 Drill Point
    • 8 Diameter, 1-1/2" Length

  • Additional Notes

    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Hex
Fastener Head Height:
0.096 - 0.11 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.244 - 0.25 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C32-40
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Panel Thickness:
0.035 - 0.100 IN
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
0.78 lbs
Product Width:
3 in
Remarks:
The catalog UPC differ from the tarnsaction daat spreadsheet UPC
Screw Point Type:
Drill Point
Slot Depth:
0.052 - 0.066
Slot Width:
0.045 - 0.054
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
SAE J78 - 2013
Torsional Strength:
42 lb-in minimum
Washer Od:
0.322 - 0.348 in.
Washer Thickness:
0.019 - 0.031 IN
Width Across Corners:
0.272
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEKD
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEKD15 – Frequently Asked Questions

1) Are these Metallics drill screws Buy American or ARRA compliant for a government job?
No. The JTEKD15 is not Buy American compliant and is not ARRA compliant; country of origin is listed as multiple. If your project carries a domestic sourcing requirement, this part will not satisfy it.
2) What driver do I need for the Metallics JTEKD15 hex head screw?
A 1/4 inch hex driver. The head is an indented hex washer head measuring 0.244 to 0.25 inch across the flats, 0.272 across the corners, with a hex drive. A 1/4 inch magnetic nutsetter in an impact or screwgun is what installers use on these.
3) Does the JTEKD15 self-drilling screw need a separate washer?
No. The washer is integral to the head. The built-in washer measures 0.322 to 0.348 inch outside diameter and 0.019 to 0.031 inch thick, which spreads the clamp load over sheet metal and strap without adding a loose part on the job.
4) Is a zinc-plated steel self-drilling screw okay for outdoor or damp locations?
The JTEKD15 is steel with a zinc finish, which is a dry-interior plating. It is intended for electrical, plumbing, and HVAC work inside buildings. For exterior, wet, or corrosive locations, specify a stainless self-drilling screw instead of the zinc-plated steel.
5) What is the thread pitch and torsional strength of the #8 JTEKD15 drill screw?
18 threads per inch on a #8 diameter shank, with a minimum torsional strength of 42 lb-in. That torque figure is the limit to keep in mind if you are driving with an impact driver, since over-torquing is how these snap at the point.
6) What standards does the Metallics JTEKD15 self-drilling screw meet?
Dimensions are to ASME B18.6.3-2010 and threads to SAE J78-2013, with steel per AISI 1016-1024 case hardened to Rockwell C32-40. That combination is what a submittal reviewer looks for on sheet metal drill screws.
7) Is a 1-1/2 inch self-drilling screw too long for attaching a box or strap to metal stud?
The JTEKD15 is a #8 by 1-1/2 inch screw, which is long for thin-gauge attachment where only 0.035 to 0.100 inch of steel is being drilled. The extra length is useful when you are going through a bracket, hanger, or stacked material before reaching the panel. For a flush single-layer sheet metal fix, a shorter length in the same JTEKD series is the better call.
8) Do I need to pre-drill a pilot hole for the Metallics JTEKD15?
No pilot hole. It is a Type BSD self-drilling and tapping screw with a drill point, so it cuts its own hole and forms its own thread in one pass. Drill time runs about 2.5 seconds through a 1 mm plate.
9) How many Metallics JTEKD15 screws come in a jar?
They ship in a jar of 100, which is the order minimum. Jar weight is 0.78 lbs.
How fast can I get the Metallics JTEKD15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKD15 come with a warranty?
Absolutely. The Metallics JTEKD15 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKD15?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKD15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!