Metallics JTEKD114V 8 x 1-1/4 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.11
$0.11
Metallics JTEKD114V 8 x 1-1/4 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 500qty

Metallics JTEKD114V 8 x 1-1/4 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEKD114V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.11
$0.11
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1-1/4 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 500qty

  • Additional Notes

    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

  • Features

    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
    • Steel Zinc Material
    • 1/4 Indented Hex Head with Hex Drive
    • 8 Diameter, 1-1/4" Length
    • #2 Drill Point

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Hex
Fastener Head Height:
0.096 - 0.11 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.244 - 0.25 in.
Fastener Length:
1/1/04
Hardness:
Rockwell C32-40
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Order Minimum Imperial:
500
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Panel Thickness:
0.035 - 0.100 IN
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
1.8 lbs
Product Width:
3.5 in
Screw Point Type:
Drill Point
Slot Depth:
0.052 - 0.066
Slot Width:
0.045 - 0.054
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
SAE J78 - 2013
Torsional Strength:
42 lb-in minimum
Washer Od:
0.322 - 0.348 in.
Washer Thickness:
0.019 - 0.031 IN
Width Across Corners:
0.272
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEKD
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEKD114V – Frequently Asked Questions

1) Will a #8 self-drilling screw hold in exterior or damp locations?
The JTEKD114V is carbon steel with a zinc finish, built from AISI 1016-1024 steel. Zinc plating handles dry indoor and protected locations. For sustained outdoor exposure, washdown areas, or treated lumber contact, move to a stainless or a coated exterior-rated drill screw instead.
2) Do these Metallics drill screws meet Buy American and ARRA requirements for a public project?
The JTEKD114V is flagged compliant for both ARRA and Buy American. Country of origin is China. On a federally funded job, check which clause your contract actually invokes, since Buy American Act treatment and a strict domestic-manufacture clause are not the same test.
3) Is a 1-1/4 inch screw long enough for hanging strut or boxes to metal studs?
At 1-1/4 inches the JTEKD114V gives enough reach for mounting through a channel, clip, or box flange into light-gauge studs or sheet steel. What limits it is the drill point, not the length: the material it drills through is capped at 0.100 inch. For thicker base metal or deeper stack-ups, step up to a heavier point size.
4) What driver do I need for the Metallics JTEKD114V hex head screw?
It takes a 1/4 inch hex driver. The indented hex head measures 0.244 to 0.25 inch across the flats, 0.272 inch across corners, with a head height of 0.096 to 0.11 inch, so a standard 1/4 inch magnetic nut setter in a screw gun seats it fine.
5) Does the JTEKD114V screw come with a washer, and how big is it?
An integral washer is part of the head. Washer outside diameter runs 0.322 to 0.348 inch with a thickness of 0.019 to 0.031 inch, so it spreads bearing load over thin sheet and soft materials without a separate loose washer to handle overhead.
6) How many screws come in a jar of Metallics JTEKD114V?
They ship in a jar with a 500 count order minimum, which is the standard buy for this item. The jar weighs 1.8 lbs.
7) What is the thread count and how much torque will the JTEKD114V take before it snaps?
18 threads per inch on a #8 diameter, 1-1/4 inch long screw, with a minimum torsional strength of 42 lb-in. Case hardness is Rockwell C32-40. Set your gun clutch rather than running it at full impact; 42 lb-in is where failure begins, not a working target.
8) What standards does the Metallics JTEKD114V self-drilling screw conform to?
Dimensions follow ASME B18.6.3-2010 and the threads follow SAE J78-2013, which is the self-drilling tapping screw spec. If your submittal calls for a J78 Type BSD drill screw, this is that item.
9) Do I need to pre-drill a pilot hole for these screws?
No. The Type BSD design has a drill point that cuts its own hole and taps the thread in one pass through sheet metal within the 0.035 to 0.100 inch range, so there is no separate pilot step. Steady pressure matters more than speed; let the point bite before leaning on it.
How fast can I get the Metallics JTEKD114V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKD114V come with a warranty?
Absolutely. The Metallics JTEKD114V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKD114V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKD114V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!