Metallics JFWP65SS 8 x 1-3/4 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFWP65SS 8 x 1-3/4 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

Metallics JFWP65SS 8 x 1-3/4 in. Flat Head Phillips Wood Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFWP65SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1-3/4 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Flat Head with Phillips Drive
    • Stainless wood screws are usually supplied without additional finish
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • 8 Diameter, 1-3/4" Length
    • 18-8 Stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.100 - 0.100 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.292 - 0.332 in.
Fastener Length:
1/3/04
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.113 - 0.136
Phillips Recess Diameter:
0.191 - 0.204
Phillips Recess Width:
0.032
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
0.69 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
15
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Details:
Wood Screw
Product Material:
18-8 Stainless

Metallics JFWP65SS – Frequently Asked Questions

1) What size and length is the Metallics JFWP65SS wood screw, and how is it sold?
It's a #8 diameter by 1-3/4 inch flat head Phillips wood screw in 18-8 stainless. It ships in a jar of 100, which is also the order minimum.
2) Do I need to pre-drill for these, or do they self-drill?
Pre-drill. It's a tapered point wood screw with a single-lead 15 threads per inch thread, not a self-drilling fastener. Stainless is softer than hardened steel and will twist off if you drive it dry into hard or dense wood, so a pilot hole is the safe practice in oak, maple or near an edge.
3) Can I use these on a federally funded job with Buy American requirements?
No. The JFWP65SS screws are not Buy American compliant and are not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic sourcing clause, you need a domestically produced fastener instead.
4) Which Phillips bit do I need for these #8 stainless wood screws?
A #2 Phillips driver. The recess runs 0.191 to 0.204 inch in diameter and 0.113 to 0.136 inch deep, so a #2 bit seats fully; a #1 will cam out and chew the recess, which matters more on stainless than on hardened steel.
5) Are these stainless screws OK for outdoor or damp locations?
18-8 stainless is an austenitic chrome-nickel grade and is used uncoated for wet and exterior work, which is why these are supplied with no additional finish. For chloride exposure such as coastal salt spray or pool rooms, 316 stainless is the more corrosion resistant choice.
6) Will these meet a spec calling out ASME B18.6.1 wood screws?
Yes. The JFWP series is built to the ASME B18.6.1 dimensional standard, with threads to ASME B18.6.1-1997, so the head, recess and thread dimensions conform to the inch wood screw standard a drawing would reference.
7) What are #8 x 1-3/4 stainless flat head wood screws typically used for on an electrical or mechanical job?
These are the general mounting screw for fastening into wood: device boxes and straps to studs, plates and brackets to blocking, equipment feet to plywood. Metallics lists the application as the electrical, plumbing, heating and air conditioning trades, and the stainless grade makes them the pick where a plain steel screw would rust and stain the substrate.
How fast can I get the Metallics JFWP65SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP65SS come with a warranty?
Absolutely. The Metallics JFWP65SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP65SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP65SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!