Metallics JFWP28SS 10 x 3/4 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.74
$1.69
Metallics JFWP28SS 10 x 3/4 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

Metallics JFWP28SS 10 x 3/4 in. Flat Head Phillips Wood Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFWP28SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.74
$1.69
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 3/4 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Stainless wood screws are usually supplied without additional finish
    • Flat Head with Phillips Drive
    • 18-8 Stainless Material
    • 10 Diameter, 3/4" Length
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Country Of Origin:
MUL
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.116 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.34 - 0.385 in.
Fastener Length:
4-Mar
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.123 - 0.146
Phillips Recess Diameter:
0.245 - 0.258
Phillips Recess Width:
0.034
Product Family:
Electrical Supplies
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.53 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
13
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
18-8 Stainless

Metallics JFWP28SS – Frequently Asked Questions

1) What driver bit do I need for the Metallics JFWP28SS #10 wood screws?
A #3 Phillips bit. The JFWP28SS takes a Phillips drive with a #3 driver size, and the recess runs 0.245 to 0.258 inches in diameter at 0.123 to 0.146 inches deep. Running a #2 bit in a recess that size is how you cam out and chew the head, especially in stainless, which is softer than hardened steel.
2) Are these #10 x 3/4 in. wood screws OK for outdoor or damp locations?
Yes. The JFWP28SS is made from 18-8 stainless, which is the standard corrosion-resistant austenitic grade used for exterior and wet-area work. Stainless wood screws like these are normally supplied bare with no plating over them, so there is no coating to wear through at the head.
3) Can I use these stainless screws on a federally funded or Buy American job?
No. The JFWP28SS is not Buy American compliant and is not ARRA compliant, and country of origin is listed as multiple. If your spec carries a domestic-content requirement, you need a screw sourced and documented as US-made.
4) How much of a #10 x 3/4 in. wood screw is threaded?
Essentially all of it. Metallics specifies 2/3 thread on lengths of 1 inch and up, but at 3/4 inch this screw is too short to carry the minimum unthreaded shank, so the threads run as close to the underside of the head as practical. Thread pitch is 13 per inch with a tapered point, so it drives into softwood without a pilot and pulls tight over a thin part being fastened down.
5) How are the Metallics JFWP wood screws packaged, and what is the minimum order?
They come in a jar, 100 screws minimum. That is the order increment for the JFWP28SS, so you are buying by the jar rather than by the piece. Metallics lists other sizes and quantities in the JFWP line by request.
6) What are #10 x 3/4 in. flat head stainless wood screws typically used for on a jobsite?
Metallics lists these for electrical, plumbing, heating and air conditioning work. In practice that is mounting boxes, straps, clamps, standoffs and small plates to wood studs, joists and blocking. At 3/4 inch long they are for thin material into wood, not for structural attachment, and the tapered point makes them a wood screw only, not a self-drilling screw for metal studs or sheet steel.
7) Do these stainless wood screws meet a recognized dimensional spec?
Yes. Head, recess and thread dimensions on the JFWP28SS follow ASME B18.6.1, with the thread specifically to ASME B18.6.1-1997. That means head diameter, recess and pitch interchange with any other #10 wood screw built to the same standard, so it drops into existing countersinks and prepped holes.
How fast can I get the Metallics JFWP28SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP28SS come with a warranty?
Absolutely. The Metallics JFWP28SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP28SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP28SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!