Metallics JFWP34SS 10 x 3 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$54.24
$5.06
Metallics JFWP34SS 10 x 3 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

Metallics JFWP34SS 10 x 3 in. Flat Head Phillips Wood Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFWP34SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$54.24
$5.06
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 3 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Stainless wood screws are usually supplied without additional finish
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • 10 Diameter, 3" Length
    • Flat Head with Phillips Drive
    • 18-8 Stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Country Of Origin:
MUL
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.116 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.34 - 0.385 in.
Fastener Length:
3
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.123 - 0.146
Phillips Recess Diameter:
0.245 - 0.258
Phillips Recess Width:
0.034
Product Family:
Electrical Supplies
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
1.63 lbs
Product Width:
3.5 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
13
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Details:
Wood Screw
Product Material:
18-8 Stainless

Metallics JFWP34SS – Frequently Asked Questions

1) How many Metallics JFWP34SS wood screws come in a jar, and can I buy just a few?
The JFWP34SS ships as a jar of 100, and 100 is the order minimum, so you buy it by the jar rather than by the piece. Pack weight is 1.63 lbs.
2) What size Phillips bit do I need for these #10 x 3 in. Metallics wood screws?
Use a #3 Phillips. The recess is 0.245 to 0.258 in. diameter and 0.123 to 0.146 in. deep, so a #2 bit will sit shallow and cam out when you are driving a 3 inch screw.
3) Are the Metallics JFWP screws okay for outdoor or wet locations?
They are 18-8 stainless, which is the standard corrosion resistant austenitic grade used for exterior and damp work, and stainless wood screws like these are supplied bare with no additional coating or plating on top.
4) Can I use the Metallics JFWP34SS on a federally funded job with Buy American requirements?
No. These screws are not Buy American compliant and not ARRA compliant, and country of origin is listed as multiple. For a job with domestic sourcing language in the contract you need a different fastener.
5) How much of a #10 x 3 in. Metallics wood screw is actually threaded?
On this series the thread runs two thirds of the length on anything over 1 inch, so a 3 inch screw carries roughly 2 inches of thread with a plain shank under the head. Thread count is 13 per inch with a tapered point, so it pulls the top piece tight against the bottom piece instead of jacking them apart.
6) Do these screws self-drill, or do I need to pre-drill?
Pre-drill. The JFWP34SS has a tapered point, not a self-drilling or type-17 auger point, and stainless is softer than hardened steel, so a pilot hole in hardwood keeps the heads from twisting off. In softwood a pilot for the shank portion is still worth cutting at 3 inches of length.
7) Do these Metallics stainless wood screws meet a dimensional spec I can put on a submittal?
Head, drive and thread geometry conform to ASME B18.6.1, with the thread called out to ASME B18.6.1-1997. That is the wood screw standard a spec writer will be looking for on the submittal.
8) What trades use a 3 inch #10 stainless flat head wood screw like this?
Metallics lists the JFWP series for electrical, plumbing, heating and air conditioning work. In practice that is anchoring straps, hangers, boxes and backing plates into wood framing where the fastener may see moisture, and the 3 inch length lets you get through furring or sheathing into solid stud.
How fast can I get the Metallics JFWP34SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP34SS come with a warranty?
Absolutely. The Metallics JFWP34SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP34SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP34SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!