Metallics JFWP10SS 6 x 3/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFWP10SS 6 x 3/4 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

Metallics JFWP10SS 6 x 3/4 in. Flat Head Phillips Wood Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFWP10SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 3/4 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

  • Features

    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Stainless wood screws are usually supplied without additional finish
    • Flat Head with Phillips Drive
    • 6 Diameter, 3/4" Length
    • 18-8 Stainless Material

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.244 - 0.279 in.
Fastener Length:
4-Mar
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.083 - 0.106
Phillips Recess Diameter:
0.161 - 0.174
Phillips Recess Width:
0.029
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.28 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Details:
Wood Screw
Product Material:
18-8 Stainless

Metallics JFWP10SS – Frequently Asked Questions

1) How are the Metallics JFWP10SS wood screws packaged, and how many come in an order?
The JFWP10SS ships in a jar of 100 screws, which is also the order minimum. If you need a different size or count, Metallics lists other sizes and quantities as available by request.
2) Can I use these on a federally funded job with Buy American requirements?
No. The JFWP10SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. For a job with domestic sourcing requirements you'll need a fastener specifically certified as domestic.
3) What driver bit do I need for these #6 Phillips flat head wood screws?
A #2 Phillips bit. The recess on the JFWP10SS measures 0.161 to 0.174 inch in diameter with a depth of 0.083 to 0.106 inch, which is standard #2 Phillips geometry, so a worn or undersized bit will cam out on stainless.
4) Are these stainless screws suitable for outdoor or damp locations?
They're 18-8 stainless, supplied without any additional finish, so there's no plating to wear through or chip. That makes them a reasonable choice for exterior trim, damp mechanical rooms, and coastal-adjacent work where plated steel screws rust out. Note they are not hardened like a structural screw, so don't substitute them where a load-rated fastener is specified.
5) How much of a 3/4 inch wood screw is actually threaded?
On a 3/4 inch length like the JFWP10SS, the thread runs nearly the full shank. Metallics notes that screws too short to accommodate the minimum thread length have threads extending as close to the underside of the head as practicable, with the 2/3 thread rule only kicking in at 1 inch and longer. Thread pitch is 18 per inch with a tapered point, so it bites in softwood without a pilot hole, though hardwood still wants one.
6) Do these Metallics wood screws meet a recognized dimensional standard?
Yes. The JFWP10SS is built to ASME B18.6.1, with threads to ASME B18.6.1-1997. That means head, recess, and thread dimensions are interchangeable with any other screw made to the same standard, which matters when you're matching screws already in a job.
7) What kind of work are these #6 x 3/4 in. stainless wood screws typically used for?
Metallics lists them for the electrical, plumbing, heating, and air conditioning trades. In practice that's mounting device boxes to studs, fastening straps and clamps, securing cover plates and small brackets to wood framing or blocking. The 3/4 inch length suits anchoring a thin part to wood rather than joining two pieces of lumber.
How fast can I get the Metallics JFWP10SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP10SS come with a warranty?
Absolutely. The Metallics JFWP10SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP10SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP10SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!