Metallics QTEKD14 8 x 1 in. 1/...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.51
$0.51
Metallics QTEKD14 8 x 1 in. 1/4 Hex Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 100qty

Metallics QTEKD14 8 x 1 in. 1/4 Hex Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - Each

(No reviews yet) Write a Review

Model: QTEKD14
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.51
$0.51
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1 in. 1/4 Hex Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 100qty

  • Features

    • #2 Drill Point
    • Domestic Steel Zinc Material
    • 1/4 Hex Head with Quadrive Drive
    • Made in the USA
    • 8 Diameter, 1" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Division:
Electrical H1
Fastener Head Type:
Hex
Product Group:
Fasteners
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Domestic Steel Zinc

Metallics QTEKD14 – Frequently Asked Questions

1) Do I need to pre-drill a pilot hole for the Metallics QTEKD14 self-drilling screw?
No pilot hole needed. The QTEKD14 has a #2 drill point, which cuts its own hole as you drive it into steel. That is the whole point of a self-drilling and tapping screw: the point drills, then the threads tap, in one pass.
2) Are Metallics QTEKD14 screws made in the USA for Buy American jobs?
Yes. The QTEKD14 is domestic steel and made in the USA, which is what procurement on federally funded or Buy American specified work usually needs to see on the submittal.
3) Will a #2 drill point screw go through heavy structural steel?
No. A #2 point is built for light to medium gauge metal, not structural thickness. If you are fastening into heavy plate or thick beam flange, you need a higher numbered drill point with a longer flute, or a pre-drilled and tapped hole. The QTEKD14's 1 inch length also limits how much material it can pass through and still engage.
4) What driver do I need for the Metallics QTEKD14 hex head screw?
A 1/4 inch hex nut driver or socket handles it, and the head also carries a Quadrive recess so a square/Phillips-style bit works when you cannot get a nut setter into a tight spot. Useful when you are running screws behind a strut channel or inside a panel.
5) What size is the Metallics QTEKD14 screw?
It is a #8 diameter screw, 1 inch long. That length suits fastening through sheet metal into light gauge steel where you need a short, self-drilling fastener, common on electrical boxes, brackets, and duct or panel work.
6) Are the Metallics QTEKD14 screws zinc plated, and can I use them outdoors?
The QTEKD14 is domestic steel with a zinc finish. Zinc plating is a general corrosion coating suited to interior and protected applications. For direct exposure to weather or coastal conditions, choose a stainless or coated exterior-rated self-drilling screw instead.
7) What is the part number to order for the 8 x 1 inch hex head self-drilling screw from Metallics?
Order Metallics QTEKD14. That covers the #8 x 1 inch, 1/4 inch hex head, Quadrive, #2 drill point screw in zinc plated domestic steel.
How fast can I get the Metallics QTEKD14 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics QTEKD14 come with a warranty?
Absolutely. The Metallics QTEKD14 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics QTEKD14?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics QTEKD14 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!