Metallics JTEK1PV 8 x 1/2 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.17
$0.17
Metallics JTEK1PV 8 x 1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 500qty

Metallics JTEK1PV 8 x 1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEK1PV
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.17
$0.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 500qty

  • Features

    • #2 Drill Point
    • 8 Diameter, 1/2" Length
    • Pan Head with Phillips Drive
    • Steel Zinc Material

  • Additional Notes

    • Other sizes and quantities available by request | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Color:
Silver
Fastener Head Height:
0.105 - 0.115 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
2-Jan
Hardness:
Rockwell C32-40
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Hd_Phil_Self-Drill_TS_Steel_and_SS.pdf
Order Minimum Imperial:
500
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Panel Thickness:
0.035 - 0.100 IN
Phillips Recess Diameter:
0.175
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.65 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.071 - 0.097
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
SAE J78 - 2013
Thread Type:
UNC
Torsional Strength:
42 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEK
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEK1PV – Frequently Asked Questions

1) What metal thickness can the Metallics JTEK1PV self-drilling screw drill through?
The #2 drill point on the JTEK1PV is rated for panel thickness of 0.035 to 0.100 inch, so it handles light-gauge steel like studs, strut, enclosure walls and channel. Thicker base metal needs a heavier drill point, and anything thinner than 0.035 inch risks the threads stripping rather than tapping.
2) Do I need to pre-drill a pilot hole for these #8 x 1/2 in. self-drilling screws?
No pilot hole. The JTEK1PV is a Type BSD self-drilling and tapping screw, meaning the drill point cuts its own hole and the 18 threads-per-inch UNC thread taps it in one pass, as long as the base metal falls in the 0.035 to 0.100 inch range.
3) What driver bit do I need for the Metallics JTEK1PV screws?
A #2 Phillips bit. The recess diameter is 0.175 inch with a gaging depth of 0.071 to 0.097 inch, so a #2 seats fully; a #1 will cam out and chew the recess under drilling torque.
4) Will a #8 x 1/2 in. pan head screw head fit inside a strut nut or sit flush against a bracket?
The pan head measures 0.306 to 0.322 inch across and 0.105 to 0.115 inch high, dimensioned to ASME B18.6.3-2010. That is a low-profile head with a broad bearing surface, so it clamps sheet metal and brackets without pulling through, but it does sit proud of the surface, it is not a flush or countersunk head.
5) Do Metallics JTEK1PV screws meet Buy American requirements for a federally funded job?
Both the Buy American and ARRA compliance flags on the JTEK1PV read compliant. Country of origin is listed as multiple, so if your contract requires a single named origin on the submittal, ask before you spec it.
6) How many screws come in a jar of Metallics JTEK1PV?
They ship in a jar with a 500-count order minimum, weighing 1.65 lbs. Other sizes and quantities are available by request.
7) Which standard are these #8 self-drilling screw threads made to?
Threads are UNC at 18 per inch, built to SAE J78 - 2013, with head geometry to ASME B18.6.3-2010. If a drawing calls out SAE J78 drill screws, the JTEK1PV answers it in #8 diameter. Worth knowing: SAE J78 carries no specification for #7 diameter drill screws, so a #7 callout cannot be matched to that standard.
How fast can I get the Metallics JTEK1PV delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEK1PV come with a warranty?
Absolutely. The Metallics JTEK1PV is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEK1PV?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEK1PV from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!