Metallics JFWPB23 8 x 2-1/2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$385.71
Metallics JFWPB23 8 x 2-1/2 in. Flat Head Phillips Wood Screws - Brass - 100qty

Metallics JFWPB23 8 x 2-1/2 in. Flat Head Phillips Wood Screws - Brass - Each

(No reviews yet) Write a Review

Model: JFWPB23
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$385.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 2-1/2 in. Flat Head Phillips Wood Screws - Brass - 100qty

  • Features

    • 8 Diameter, 2-1/2" Length
    • Flat Head with Phillips Drive
    • Brass Material

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.100 - 0.100 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.292 - 0.332 in.
Fastener Length:
2/1/02
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.113 - 0.136
Phillips Recess Diameter:
0.191 - 0.204
Phillips Recess Width:
0.032
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
1.05 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Thread Per Inch:
15
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWPB
Product Details:
Wood Screw
Product Material:
Brass

Metallics JFWPB23 – Frequently Asked Questions

1) How many Metallics JFWPB23 brass wood screws come in a jar, and can I buy just a few?
The JFWPB23 ships as a jar of 100, and 100 is the minimum order quantity. If you only need a handful for one device plate or strike, you are still buying the full jar.
2) Will these brass screws sit flush in a countersunk hole?
Yes, they are flat head, so they seat flush in a countersink or a factory-countersunk plate. Head width runs 0.292 to 0.332 in. with a head height of 0.100 in., which is what you need to confirm against a pre-drilled escutcheon or cover plate hole.
3) Can I use these on a federal or Buy American job?
No. The JFWPB23 brass wood screws are not Buy American compliant and are not ARRA compliant, with country of origin listed as multiple. If your project has domestic sourcing language in the contract, these will not pass.
4) What size Phillips driver do I need for #8 x 2-1/2 in. Metallics brass wood screws?
A #2 Phillips bit. The recess is 0.191 to 0.204 in. diameter and 0.113 to 0.136 in. deep, so a #2 seats fully. Brass is soft, so a #1 or a worn bit will cam out and strip the recess before the screw is home.
5) Are solid brass screws strong enough for structural fastening, or should I use steel?
Use steel for anything structural or load bearing. Brass is a soft, non-magnetic, corrosion-resistant material, and these are intended for electrical, plumbing, heating and air conditioning work where appearance and corrosion matter more than shear strength, such as cover plates, trim, and device mounting. For framing, blocking, or hanger support, go with a steel wood screw or lag.
6) Do these Metallics brass screws meet a recognized dimensional standard for inspection?
They are built to ASME B18.6.1, with the thread to ASME B18.6.1-1997. That is the wood screw standard, so head and thread geometry will match any spec or submittal calling out a B18.6.1 #8 flat head Phillips wood screw.
7) How much of a #8 x 2-1/2 in. Metallics wood screw is threaded?
It is a partial-thread wood screw: thread runs roughly two thirds of the length, leaving an unthreaded shank under the head. That shank is what lets the screw clamp two pieces together instead of jacking them apart, so the top member needs a clearance hole, not a pilot hole.
8) What is the part number and shipping weight for a jar of #8 x 2-1/2 in. brass flat head wood screws?
Metallics part number JFWPB23, JFWPB series. A jar of 100 weighs 1.05 lbs.
9) I need a different length or a larger quantity of these brass wood screws. Is that possible?
Other sizes and quantities in the JFWPB brass flat head Phillips wood screw line can be had by request. The JFWPB23 itself is fixed at #8 diameter, 2-1/2 in. long, in a 100-count jar.
How fast can I get the Metallics JFWPB23 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWPB23 come with a warranty?
Absolutely. The Metallics JFWPB23 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWPB23?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWPB23 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!