You may also like
84360 Viega MegaPress 45° elbow Smart Connect technology Carbon steel, 2'' x 2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2
- Material Type:
- Carbon Steel
- Product Dimension:
- 2'' x 2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Elbows
- Product Type:
- Elbow
- Product Length:
- 6.657"
- Product Height:
- 2.894"
- Product Weight:
- 1.975 lbs
- Product Width:
- 4.795"
- Product Material:
- Carbon steel
Viega 84360 – Frequently Asked Questions
1) Can I thread the Viega 84360 MegaPress elbow onto threaded pipe?
No. Both ends of the 84360 are press connections (P1 x P2), not NPT threads. It slides over the outside of prepared 2 inch pipe and is crimped with a press tool and the matching 2 inch MegaPress jaw or ring. If you need to tie into a threaded nipple or valve, use a press-by-thread adapter ahead of this elbow.
2) Is the Viega MegaPress 84360 elbow suitable for a black iron gas line?
The 84360 is a carbon steel press elbow for use on steel pipe systems. Carbon steel MegaPress fittings are the line used on black iron pipe. Gas service specifically requires the MegaPressG (yellow seal) version, so if the run is fuel gas, order the G fitting rather than this one.
3) How much space do I need to fit the 2 inch MegaPress 45 degree elbow in a tight ceiling?
Overall the 84360 measures 6.657 inches long, 4.795 inches wide and 2.894 inches high, and weighs 1.975 lbs. Those are the fitting envelope numbers, not the pressed pipe run, so allow clearance around them for the press jaw to close squarely on each socket.
4) What does Smart Connect do on the Viega 84360 elbow?
Smart Connect is Viega's unpressed-connection feature: an unpressed joint leaks deliberately during pressure test so an inspector or installer finds the missed crimp before the system is charged and closed up. It is a QA aid on the 84360, not a substitute for pressing every socket.
5) Do I need to do anything to the pipe before pressing the MegaPress 84360 on?
Yes. Cut the 2 inch pipe square, deburr it inside and out, clean off cutting oil and scale, and mark the insertion depth so you can confirm the pipe is fully bottomed in the socket before you press. Each of the two sockets is pressed separately with a 2 inch jaw or ring.
6) Where is the Viega 84360 MegaPress elbow made?
The 84360 elbow is made in Germany. That matters on submittal packages where country of origin has to be documented for the fitting schedule.
How fast can I get the Viega 84360 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 84360 come with a warranty?
Absolutely. The Viega 84360 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 84360?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 84360 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.