You may also like
84575 Viega MegaPress tee Smart Connect technology Carbon steel, 1-1/4'' x 1-1/4'' x 1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x FPT
- Material Type:
- Carbon Steel
- Product Dimension:
- 1-1/4'' x 1-1/4'' x 1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 6.457"
- Product Height:
- 2.205"
- Product Weight:
- 1.349 lbs
- Product Width:
- 2.953"
- Product Material:
- Carbon steel
Viega 84575 – Frequently Asked Questions
1) What are the three outlets on the Viega MegaPress 84575 tee?
The 84575 is a 1-1/4 inch x 1-1/4 inch x 1/2 inch tee with a P1 x P2 x FPT connection pattern. The two 1-1/4 inch ends are press connections onto pipe; the 1/2 inch branch is a female pipe thread, so you thread into that outlet rather than press it. That makes it the fitting to use when you need a small threaded take-off (gauge, drain, sensor, drop) off a 1-1/4 inch run.
2) Can the Viega 84575 MegaPress tee be pressed onto copper or PEX?
No. The 84575 is a carbon steel press fitting, built for black iron and carbon steel pipe systems. Copper and PEX require entirely different Viega systems and jaws. Use it only on the steel pipe it is rated for.
3) Does the 1/2 inch branch on this MegaPress tee need sealant or tape?
The 1/2 inch outlet is a female pipe thread, so it gets made up the normal way with thread sealant or PTFE tape on the male thread going into it. Only the two 1-1/4 inch ends are press joints.
4) What does Smart Connect technology do on the Viega MegaPress 84575?
Smart Connect is Viega's unpressed-connection feature: it lets a joint that was left unpressed leak visibly during pressure testing, so an installer can find and press it before the system is put into service. On a 1-1/4 inch x 1-1/4 inch x 1/2 inch tee with two press ends, that is two joints you can verify at test.
5) Is the Viega 84575 tee a reducing tee?
Yes, on the branch only. The run stays full size at 1-1/4 inch through both press ends, and the branch reduces to a 1/2 inch female thread. If you need a 1/2 inch branch pressed rather than threaded, this is not the fitting.
How fast can I get the Viega 84575 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 84575 come with a warranty?
Absolutely. The Viega 84575 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 84575?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 84575 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.