Metallics RSDS6V 9 x 3 in. Bug...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.24
$0.24
Metallics RSDS6V 9 x 3 in. Bugle Head Star Drive Deck Screws - Steel Yellow Zinc - Type 17 - Threads - 500qty

Metallics RSDS6V 9 x 3 in. Bugle Head Star Drive Deck Screws - Steel Yellow Zinc - Type 17 - Threads - Each

(No reviews yet) Write a Review

Model: RSDS6V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.24
$0.24
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
9 x 3 in. Bugle Head Star Drive Deck Screws - Steel Yellow Zinc - Type 17 - Threads - 500qty

  • Additional Notes

    • Other sizes and quantities available by request | In the absence of a single industry standard for Deck Screws, these dimensions are offered as a guide; slight deviations are acceptable.

  • Features

    • The deeper thread design offers greater resistance to pull-out forces.
    • Bugle Head with Star Drive Drive
    • 9 Diameter, 3" Length
    • Steel Yellow Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Star (Flat Six-Lobe)
Driver Size:
T25
Fastener Head Height:
0.124 - 0.124 in.
Fastener Head Type:
Bugle
Fastener Head Width:
0.316 - 0.358 in.
Fastener Length:
3
Language Code:
EN
Material Standard:
AISI 1018 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Bugle_Hd_Star_Drive_Type_17_Deck_Screw.pdf
Order Minimum Imperial:
500
Order Minimum Uom Imperial:
CT
Pack Type:
Box
Product Group:
Screws
Product Height:
6 in
Product Length:
7.25 in
Product Weight:
7.35 lbs
Product Width:
6.25 in
Screw Point Type:
Type 17
Sub Division:
Electrical-E H2
The Chip Cavity Or Auger Point Enables The Fastener To Drive Especially In Denser Woods:
without pre-drilling a pilot hole.
Thread Per Inch:
9
Thread Type:
UNC
Department:
Fasteners
Product Subgroup:
Wood and Construction Screws
Product Type:
Deck Screw
Type2:
Deck Screw
Series:
RSDS
Product Finish:
Yellow Zinc Dichromate
Product Details:
Deck Screw
Product Material:
Steel Yellow Zinc

Metallics RSDS6V – Frequently Asked Questions

1) What size driver bit do I need for the Metallics RSDS6V deck screws?
A T25 star bit. The RSDS6V uses a star (flat six-lobe) recess, so a T25 Torx-style driver seats fully and keeps the bit from camming out when you run 3 inch screws into dense framing.
2) Do I have to pre-drill a pilot hole for these 3 inch deck screws?
No. The RSDS6V has a Type 17 point, the chip cavity or auger point that lets the fastener drive even in denser woods without pre-drilling a pilot hole. That is the main reason crews choose a Type 17 over a plain gimlet-point deck screw on hardwood decking or older dried framing.
3) Are yellow zinc deck screws OK for pressure treated lumber and outdoor decks?
The RSDS6V is carbon steel with a yellow zinc dichromate finish. That coating gives moderate corrosion resistance for general exterior wood fastening, but it is not stainless and it is not a coating rated against the copper-based chemistry in modern pressure treated lumber. For ACQ or CA treated decking in a wet or coastal location, step up to stainless or a polymer-coated treated-lumber deck screw.
4) Will a bugle head deck screw sit flush in the decking or do I need to countersink?
The bugle head is self-countersinking in wood, which is why it is the standard head for decking. Head width runs 0.316 to 0.358 in. with a head height of 0.124 in., so it draws down into the board face and leaves a shallow dish rather than a proud head you would trip a snow shovel on.
5) How many screws come in a box of Metallics RSDS6V?
They ship as a 500 count box. The order minimum is 500 CT, so 500 pieces is the smallest quantity you can buy, and the box weighs 7.35 lbs.
6) Do Metallics RSDS6V screws meet Buy American and ARRA requirements for a public project?
Both flags are marked compliant on the RSDS6V: ARRA compliant and Buy American compliant. Country of origin is listed as multiple, so if your contract requires a single named origin on the submittal, specify it at the time of order.
7) What steel are these deck screws made from?
AISI 1018 to 1022 low carbon steel, case hardened in the usual way for a Type 17 point to bite without pre-drilling. Thread is a 9 threads-per-inch UNC form.
8) Can I get the Metallics RSDS screws in other lengths or box counts?
The RSDS series runs other sizes and quantities by request; RSDS6V is specifically the 9 x 3 in. bugle head star drive Type 17 screw in a 500 count box. If you need a shorter screw for 5/4 decking over thin framing or a longer one for stair stringers, ask for the alternate size in the same series.
How fast can I get the Metallics RSDS6V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics RSDS6V come with a warranty?
Absolutely. The Metallics RSDS6V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics RSDS6V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics RSDS6V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!