You may also like
90605 Viega MegaPress tee Smart Connect technology 316 stainless steel, 4'' x 4'' x 2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x P3
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 4'' x 4'' x 2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 10.709"
- Product Height:
- 5.193"
- Product Weight:
- 5.979 lbs
- Product Width:
- 5.114"
- Product Material:
- 316 stainless steel
Viega 90605 – Frequently Asked Questions
1) What pipe sizes does the Viega MegaPress 90605 tee connect?
The 90605 MegaPress tee is a 4 inch x 4 inch x 2 inch reducing tee, so the run is 4 inch on both ends and the branch takes 2 inch pipe. All three ends are press connections (P1 x P2 x P3), no threading or welding at any port.
2) Is the Viega 90605 tee stainless or carbon steel, and what pipe is it meant for?
It is built from 316 stainless steel, the grade Viega uses for its stainless MegaPress line rather than the carbon steel MegaPress fittings used on black iron pipe. 316 is the higher-molybdenum austenitic grade, so it is the one specified where chlorides or wash-down conditions would attack 304 or carbon steel.
3) Is this a Viega MegaPress or a ProPress fitting? I have copper lines.
The 90605 is a MegaPress fitting, which is Viega's press system for steel pipe, not ProPress for copper or PEX. If your branch is copper tube, a MegaPress tee is the wrong family and you want a ProPress stainless or copper tee instead.
4) Can I use the Viega 90605 tee to take a 2 inch branch off an existing 4 inch steel main?
Yes, that is exactly what the 4 x 4 x 2 configuration is for: the 4 inch run carries the main and the reduced leg drops to a 2 inch branch. You will need to cut and deburr the 4 inch main, and press with jaws or rings sized for each port, since the fitting has three different-sized press connections on one body.
5) What does Smart Connect technology on this Viega tee actually do for me?
Smart Connect is the feature built into the 90605 tee's sealing element that lets an unpressed joint leak deliberately during pressure testing. Instead of an unpressed connection looking tight until the system is in service, it shows itself on the test, so you can find a missed port on a three-way fitting before closing up the ceiling.
6) What exact part number and country of origin should I put on the submittal for a 4 x 4 x 2 stainless MegaPress tee?
Specify Viega part number 90605, a 4" x 4" x 2" MegaPress 316 stainless steel tee, made in Germany.
How fast can I get the Viega 90605 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 90605 come with a warranty?
Absolutely. The Viega 90605 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 90605?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 90605 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.