You may also like
90675 Viega MegaPress reducer Smart Connect technology 316 stainless steel, 2-1/2'' x 2''
Manufacturer Resources
Product Specs
- Connection Type:
- FTG x P
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 2-1/2'' x 2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Reducers
- Product Type:
- Tee
- Product Length:
- 4.996"
- Product Height:
- 2.894"
- Product Weight:
- 1.446 lbs
- Product Width:
- 2.894"
- Product Material:
- 316 stainless steel
Viega 90675 – Frequently Asked Questions
1) What do FTG x P ends mean on the Viega MegaPress 90675 reducer?
The 90675 is configured FTG x P: the 2-1/2 inch end is a fitting (FTG) end sized to slip into another MegaPress fitting's socket, and the 2 inch end is a press (P) end that accepts pipe. So you are not joining two pipes with it, you are stepping down out of a 2-1/2 inch fitting into 2 inch pipe. If both ends need to take pipe, you need a P x P reducer instead.
2) Is the Viega 90675 MegaPress reducer stainless or carbon steel?
It is 316 stainless steel, the higher-molybdenum grade used where the line sees corrosive media or a wet, chemically aggressive environment. Carbon steel MegaPress fittings are a different product family, so do not treat the 90675 as a substitute in a plain black-iron gas or hydronic run spec'd for carbon steel bodies.
3) Will the Viega 90675 reducer work going from 2 inch pipe up into a 2-1/2 inch fitting?
Yes, that is exactly its orientation. The press end takes 2 inch pipe and the fitting end drops into a 2-1/2 inch MegaPress socket, so it transitions a 2 inch branch or riser into 2-1/2 inch stainless fittings in either flow direction. What it will not do is join 2-1/2 inch pipe directly, since that end is a fitting end, not a press socket.
4) What is Smart Connect on this MegaPress reducer, and why does an installer care?
Smart Connect is Viega's unpressed-connection feature: an unpressed joint leaks visibly during pressure test rather than holding temporarily, so a missed press on a 2-1/2 by 2 inch reducer gets caught at test instead of after the ceiling closes. That is the practical reason inspectors and plumbing contractors accept press on large-diameter stainless runs.
5) What part number do I order for the 2-1/2 by 2 inch MegaPress stainless reducer?
Viega part number 90675. One configuration only, FTG x P, 2-1/2 inch by 2 inch, 316 stainless, so there are no finish or seal options to specify when you order it.
6) Where is the Viega 90675 MegaPress fitting made?
Germany. For submittal packages and Buy America style sourcing questions on institutional jobs, the 90675 is a German-manufactured 316 stainless fitting, so flag it early if the project carries domestic-content requirements.
How fast can I get the Viega 90675 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 90675 come with a warranty?
Absolutely. The Viega 90675 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 90675?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 90675 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.