91630 Viega MegaPress tee Smart Connect technology 316 stainless steel, 1'' x 1'' x 1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x P3
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 1'' x 1'' x 1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 5.256"
- Product Height:
- 1.78"
- Product Weight:
- 0.871 lbs
- Product Width:
- 3.169"
- Product Material:
- 316 stainless steel
Viega 91630 – Frequently Asked Questions
1) What pipe sizes does the Viega 91630 MegaPress tee connect?
The Viega 91630 is a reducing press tee sized 1 inch x 1 inch x 1/2 inch, so the run is 1 inch on both ends and the branch drops to 1/2 inch. All three outlets are press connections (P1 x P2 x P3), meaning there is no threading or welding on any of the three joints.
2) Is the MegaPress 91630 tee stainless or carbon steel?
It's 316 stainless steel, the more corrosion resistant of the MegaPress materials. That matters if you're running the line in a wet, washdown, coastal, or chemically aggressive area where a carbon steel press fitting would rust. Don't substitute it for a carbon steel MegaPress tee on a spec that calls for 316.
3) I need a full 1 inch branch, not 1/2 inch. Is this the right tee?
No. The 91630 reduces the branch to 1/2 inch. If your branch run is 1 inch you need the straight 1 x 1 x 1 MegaPress stainless tee instead. Reducing at the tee is fine for a small takeoff like a gauge, drain, or small device feed, but it will throttle a full size branch.
4) What is Smart Connect on this Viega tee and does it change how I install it?
Smart Connect is the feature built into the MegaPress sealing element that lets an unpressed joint weep during pressure testing, so a connection you missed shows itself before the walls close up. Install is unchanged: you still press every one of the three outlets. It just gives you a way to catch a skipped press on test.
5) How much room do I need to fit the 91630 MegaPress tee in a tight chase?
The fitting measures 5.256 inches long, 3.169 inches wide, and 1.78 inches high, and weighs 0.871 lbs. Plan clearance beyond those numbers for the press jaw to swing around each of the three outlets, which is usually what decides whether a fitting goes in a narrow chase, not the fitting body itself.
How fast can I get the Viega 91630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 91630 come with a warranty?
Absolutely. The Viega 91630 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 91630?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 91630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.