You may also like
91900 Viega MegaPress tee Smart Connect technology 316 stainless steel, 2'' x 2'' x 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x FPT
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 2'' x 2'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 7.677"
- Product Height:
- 2.913"
- Product Weight:
- 2.072 lbs
- Product Width:
- 3.74"
- Product Material:
- 316 stainless steel
Viega 91900 – Frequently Asked Questions
1) What are the three outlet sizes and connection types on the Viega MegaPress 91900 tee?
The Viega 91900 is a reducing tee sized 2 inch x 2 inch x 3/4 inch, with connections of P1 x P2 x FPT. The two 2 inch run ends are press connections and the 3/4 inch branch is female pipe thread, so you press the run onto 2 inch pipe and thread a 3/4 inch male-threaded nipple, valve, or sensor fitting into the branch.
2) Do I need to thread or weld 2 inch pipe to install this Viega tee?
No. The two 2 inch ends of the 91900 are press connections made with a press tool and jaw, so there is no threading, welding, or open flame on the main run. Only the 3/4 inch branch is threaded. That is the main reason crews choose a press tee on occupied buildings where hot work permits are a problem.
3) What is Smart Connect on the Viega MegaPress 91900 and why does it matter on inspection?
Smart Connect is Viega's feature that lets an unpressed MegaPress connection leak intentionally during pressure testing, so a joint somebody missed shows itself before the system is closed up. On a 2 inch x 2 inch x 3/4 inch tee with two press ends, that is two joints you can verify by test rather than by memory.
4) What do I order with the Viega 91900 to tap a 3/4 inch gauge or drain off a 2 inch line?
The 3/4 inch port is female thread, so you supply the male side: a 3/4 inch MPT nipple, ball valve, gauge adapter, or hose-bib, plus thread sealant rated for the media. Nothing threaded is included with the tee. The 2 inch ends need only a press tool with the correct 2 inch jaw or ring.
5) Which Viega part number should I give my distributor for a 2 inch x 2 inch x 3/4 inch FPT stainless press tee?
Viega part number 91900. It is the 316 stainless MegaPress tee, 2 inch x 2 inch x 3/4 inch, press by press by female pipe thread, with Smart Connect.
6) Where is the Viega 91900 MegaPress tee made, and how much does it weigh for a submittal?
Made in Germany, and the fitting weighs 2.072 lbs. Both values come up on institutional submittals and on hanger spacing checks when several large stainless press fittings land in one run.
How fast can I get the Viega 91900 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 91900 come with a warranty?
Absolutely. The Viega 91900 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 91900?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 91900 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.