You may also like
95560 Viega MegaPress tee Smart Connect technology 304 stainless steel, 2-1/2'' x 2-1/2'' x 2-1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x P3
- Material Type:
- 304 Stainless Steel
- Product Dimension:
- 2-1/2'' x 2-1/2'' x 2-1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 7.953"
- Product Height:
- 3.543"
- Product Weight:
- 3.346 lbs
- Product Width:
- 5.866"
- Product Material:
- 304 stainless steel
Viega 95560 – Frequently Asked Questions
1) What pipe size does the Viega 95560 MegaPress tee fit?
The Viega 95560 is an equal-run tee sized 2-1/2 inch on all three outlets, so every branch and both run ends take 2-1/2 inch pipe. All three ends are press connections (P1 x P2 x P3), not threaded and not grooved, so nothing on this fitting is meant to be screwed or welded onto the pipe.
2) Is the Viega 95560 MegaPress tee stainless or carbon steel?
It is 304 stainless steel. That matters when you are matching the fitting to the piping material and to the system fluid, since carbon steel MegaPress fittings and stainless fittings are separate lines and are not interchangeable on the same run.
3) What does Smart Connect technology do on a Viega MegaPress fitting?
Smart Connect is Viega's unpressed-connection feature: if a joint on the 95560 tee is left unpressed, it leaks during pressure testing so the installer can find it before the system goes into service. It is a commissioning safeguard, not a sealing method, so every one of the three 2-1/2 inch connections still has to be pressed with the proper jaw.
4) Do I need a special press tool for a 2-1/2 inch MegaPress fitting?
Yes. At 2-1/2 inch, MegaPress moves out of standard jaw range and into press ring and actuator territory, so plan on the large-diameter ring set rather than the compact jaws used on smaller sizes. Order that tooling alongside the tee if your crew only carries the small-size jaws.
5) How much room do I need around the pipe to press the Viega 95560 tee?
The fitting itself measures 7.953 inches long, 5.866 inches wide and 3.543 inches high, and it weighs 3.346 lbs. Lay that out against your hanger spacing and wall clearance, then add space for the press ring and actuator to swing at each of the three joints, which is usually the tighter constraint in a mechanical room.
6) Can I press this Viega tee onto threaded pipe instead of cutting in a press fitting?
No. All three ends are press ends, so the pipe has to be cut square, deburred and marked for insertion depth, then pressed. There is no thread, socket or groove on the 95560. If the branch you are tying into is threaded, you need a transition fitting to get from thread to a pressable pipe end.
How fast can I get the Viega 95560 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 95560 come with a warranty?
Absolutely. The Viega 95560 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 95560?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 95560 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.