Altronix AL1012ULX Power Suppl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$514.26
$396.31
Altronix AL1012ULX Power Supply/Access Power Controller, Input 115VAC 60Hz at 2.6A, Single Output, 12VDC at 10A, Grey Enclosure

Altronix AL1012ULX Power Supply/Access Power Controller, Input 115VAC 60Hz at 2.6A, Single Output, 12VDC at 10A, Grey Enclosure

(No reviews yet) Write a Review

Model: AL1012ULX

In Stock (leaves warehouse same day if ordered before 3pm ET)

$514.26
$396.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
10A
Features:
Converts a 115VAC, 60Hz Input into a Single 12VDC Non-Power Limited Output
Includes:
Includes Enclosure, Charger, Single Fused Output
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix AL1012ULX – Frequently Asked Questions

1) How much 12VDC current will the Altronix AL1012ULX supply for my maglocks and strikes?
The AL1012ULX puts out 12VDC at 10A on a single fused output, converting a 115VAC 60Hz input. Add up the holding current of every device on the circuit (maglocks, strikes, readers, REX) and stay under 10A total, since it's one output rather than a distributed board.
2) Is the AL1012ULX a single output or does it distribute power to multiple doors?
Single fused output. For a multi-door job where you want each opening individually fused, a distribution board suits better, like the RCI DKPS-2A with 8 outputs at 12/24VDC. Use the AL1012ULX where you need one high-current 12V feed, or pair it with a downstream distribution module.
3) Will the AL1012ULX keep doors powered during an outage?
It includes a battery charger, so it maintains standby batteries wired into the unit. The batteries themselves are a separate purchase and are sized to the load and the standby time your AHJ wants.
4) My devices run on 24VDC - can I use the AL1012ULX?
No. The AL1012ULX converts a 115VAC 60Hz input into a single 12VDC output, so it is fixed at 12 volts. For 24VDC loads, the SDC 634 Series is a 4 Amp regulated and filtered supply with dual voltage selection, the BEST PS161-6 takes 120V input to 12/24V output at 6A capacity, and the Securitron AQL4 is a 12/24VDC switching supply rated 4/3 Amp. Command Access PS204/204B is a 2A 24VDC linear supply with battery backup.
5) What is the closest equivalent to the Altronix AL1012ULX at 12VDC 10A?
The Securitron AQS1210 is the closest match in capacity - it is a switching power supply rated 12 VDC at 10 Amp, the same output voltage and current as the AL1012ULX, which converts a 115VAC 60Hz input into a single 12VDC non-power-limited output at 10A. The difference is topology and packaging: the AL1012ULX ships as a supply/charger with an enclosure and a single fused output, while the AQS1210 is a switching unit fixed at 12 VDC only.
6) I need to feed several doors on separate fused circuits - is the AL1012ULX the right pick?
The AL1012ULX is a single fused output supply, so all 10A leaves on one circuit and you would need downstream distribution to break it out per door. If you want the outputs built in, the RCI DKPS-2A provides 8 outputs at 12/24VDC at 2A for access control systems. Choose the AL1012ULX when a single high-current 12VDC feed suits the design and distribution is handled elsewhere.
7) Does the AL1012ULX come with an enclosure or do I need to buy one separately?
The enclosure ships with it, grey, along with the charger and the single fused output board. You are wiring it in, not boxing it up yourself.
8) Is the AL1012ULX power-limited for a fire alarm interface?
The output is non-power-limited 12VDC. That matters for wiring separation and conduit practice, and it means you cannot treat the output conductors as power-limited circuits in the same raceway as power-limited fire alarm wiring.
9) I only need to power one electric strike. Is a 10 amp supply overkill?
For a single strike, yes, it is a lot of headroom. Smaller regulated supplies cover that, such as the SDC 620 Series at 1 amp or the Command Access PS1 Series 24VDC 1 amp unit. Step up to the AL1012ULX when you are feeding several maglocks, a run of readers, or a motorized latch retraction load that draws hard on inrush.
10) Does the AL1012ULX give me battery backup, or do I need a different unit?
The AL1012ULX includes a charger in the enclosure, so it is built to maintain standby batteries alongside its 12VDC output. If you are comparing units on that basis, the Adams Rite PS-1 is a 1 amp 12/24 volt DC regulated supply with battery backup, the Command Access PS204/204B is a 2A 24VDC linear supply with battery backup, and the Detex 10-800 Series is a universal logic controller with a 120VAC/24VDC supply and battery backup. Those are much lower capacity than the AL1012ULX 10A rating.
11) What looks like a substitute for the AL1012ULX but is not one?
A few items in the same aisle solve different problems. The ROFU 10305-LA is a power transfer hinge rated 1.5A at 42V - it moves power through the door edge, it does not generate it. The ROFU 9126T is a plug-in mini power supply at 12 VDC 1.5A with time delay, a wall-mount accessory rather than an enclosed 10A supply. The Command Access CAT Field Tester is a portable 12-24VDC unit that runs off DeWalt, Makita and Milwaukee batteries for bench and field testing. The BEST ELR150 is a power supply control module. None of these replace a 115VAC-fed 12VDC 10A supply with enclosure and charger.
12) For an access control kit rollout, is the AL1012ULX or a kit-matched supply the better standard?
If you are installing Aiphone AC Series access control kits, the AC-PS1250 is the supply built for those kits at 12V DC 5A and UL listed. The AL1012ULX is brand-neutral: it is a commercial 12VDC access power controller with a 120V input and 10A of capacity, which is what you standardize on when the panels, strikes and maglocks across a facility come from mixed manufacturers and all you need is a common 12VDC bus.
13) I need a supply where I can switch between 12 and 24 volts in the field - which ones do that instead of the AL1012ULX?
The AL1012ULX output is 12VDC only. Field-selectable alternatives include the Von Duprin PS902 at 2A 12/24 VDC field selectable, the SDC 631 Series at 1.5 Amp with dual voltage selection, the SDC 620 Series at 1 Amp with dual voltage selection, and the SDC 632 Series at 2 Amp with dual voltage selection. The ROFU 9102-12D UL and 9102-24D are offered as separate 12 and 24 volt versions off a 10/120VAC 60Hz input.
14) There is no AC power at my gate opening - what do I use in place of the AL1012ULX?
The AL1012ULX requires a 115VAC 60Hz utility feed, so it is not an option where there is no line power. The Securitron BPSS is a boxed solar power supply, which is the alternative for remote openings without an AC source. Where line power is available but the run is long, the Locknetics LP Series 150 and 250 supplies also ship with an enclosure like the AL1012ULX.
How fast can I get the Altronix AL1012ULX delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix AL1012ULX come with a warranty?
Absolutely. The Altronix AL1012ULX is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix AL1012ULX?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix AL1012ULX from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!