Altronix AL1012ULXPD8 Power Su...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$549.88
$423.77
Altronix AL1012ULXPD8 Power Supply/Charger, Input 115VAC 60Hz at 1.9A, 8 Fused Outputs, 12VDC at 10A, Grey Enclosure

Altronix AL1012ULXPD8 Power Supply/Charger, Input 115VAC 60Hz at 1.9A, 8 Fused Outputs, 12VDC at 10A, Grey Enclosure

(No reviews yet) Write a Review

Model: AL1012ULXPD8

In Stock (leaves warehouse same day if ordered before 3pm ET)

$549.88
$423.77
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
10A
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix AL1012ULXPD8 – Frequently Asked Questions

1) What is the closest equivalent to the Altronix AL1012ULXPD8 if I need 12VDC at 10 amps from another brand?
The Securitron AQS1210 is the closest match on output: it is a switching power supply rated 12 VDC at 10 amps, the same 10A current the AL1012ULXPD8 delivers at 12VDC. The difference is distribution - the Altronix unit breaks its 10A out across eight fused outputs in a grey enclosure, so each device on an access control or CCTV run gets its own protected leg. The AQS1210 is described as a single 12 VDC 10 amp supply, so if you need multiple independently fused legs you would add a distribution board downstream.
2) Does anything else give me eight outputs like the AL1012ULXPD8?
The RCI DKPS-2A is the other multi-output unit in the same class - it provides 8 outputs at 12/24VDC rated 2A for access control systems. The AL1012ULXPD8 also runs eight fused outputs but is fixed at 12VDC with 10A of current from a 115VAC 60Hz input, so the choice comes down to whether you need the higher current budget or the 24V selectability across the eight legs.
3) Can I use the AL1012ULXPD8 to run motorized latch retraction exit devices?
Motorized latch retraction devices have an inrush profile that vendors address with a purpose-built supply - the BEST RPSMLR2 Series is specifically a power supply for motorized latch retraction exit devices, and the BEST ELR150 Series is a power supply control module for electronic access control. The AL1012ULXPD8 is a general multi-output supply/charger listed for general use, CCTV, fire alarm and POIP at 12VDC and 10A, so for an MLR opening specify the MLR supply rather than assuming the general unit covers it.
4) What looks like a substitute for the AL1012ULXPD8 but is not one?
A few items sit near it in the catalog but do a different job. The ROFU 10305-LA is a tamper resistant power transfer hinge rated 1.5A at 42V - it moves power through the door rather than generating it. The Command Access CAT Field Tester is a portable 12-24VDC supply that runs off DeWalt, Makita and Milwaukee batteries for bench and field testing. The ROFU 9126T is a plug-in mini supply at 12 VDC/1.5A with time delay, and the Securitron BPSS is a boxed solar power supply. None of those replaces a hardwired 115VAC 60Hz unit feeding eight fused 12VDC outputs at 10A.
5) Can I use one Altronix AL1012ULXPD8 for both cameras and access control hardware?
Yes, that is the point of the eight separately fused outputs. Altronix supplies of this type are used for general 12V device loads, CCTV, fire alarm and PoIP equipment, and fusing each run individually means a short on a camera drop does not pull down the door hardware. Keep the combined draw within the 10A total.
6) I need battery backup with my power supply - is the AL1012ULXPD8 the right pick or is there another option?
The AL1012ULXPD8 is a power supply/charger, the charger function being what maintains standby batteries. If you want a smaller unit that also states battery backup, the Adams Rite PS-1 is a regulated 1 amp 12/24 volt DC supply with battery backup, the Command Access PS204/204B is a linear supply with 2A at 24VDC and battery backup, and the Detex 10-800 Series pairs a 120VAC/24VDC power supply and battery backup with a universal logic controller. Those are lower-current units, so size them against your total load rather than substituting them one-for-one on a 10A system.
7) Is there a UL listed alternative to the AL1012ULXPD8 for a smaller access control kit?
The Aiphone AC-PS1250 is a UL listed 12V DC 5A supply intended for AC Series access control kits, which suits a packaged intercom or entry kit rather than a whole-building distribution panel. The Command Access PS210 is a UL 6E/CSA linear supply with 1.5A at 24VDC and boost circuitry. The AL1012ULXPD8 covers the larger end at 12VDC with 10A of current across eight fused outputs in a grey enclosure.
8) I need a simple 1 amp supply for one strike - what is a cheaper-to-install option than the AL1012ULXPD8?
For a single electric strike, the SDC 620 Series is a 1 amp regulated and filtered low voltage supply with dual voltage selection, and the SDC 631 Series is a 1.5 amp regulated and filtered DC power controller, also dual voltage. Both are single-opening units. The AL1012ULXPD8 is built for scale instead, with eight fused outputs and 10A at 12VDC, which is more capacity and more wiring than a one-strike job needs.
9) Does the AL1012ULXPD8 come with an enclosure, or do I have to buy a cabinet separately?
The supply ships in its own grey enclosure, so the board, the fused output distribution and the housing are one part number. You are wiring line voltage in and low voltage out, not sourcing a can for it.
How fast can I get the Altronix AL1012ULXPD8 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix AL1012ULXPD8 come with a warranty?
Absolutely. The Altronix AL1012ULXPD8 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix AL1012ULXPD8?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix AL1012ULXPD8 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!