Altronix AL1024ULXPD8 Power Su...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$609.10
$469.42
Altronix AL1024ULXPD8 Power Supply/Charger, Input 115VAC 60Hz at 4.2A, 8 Fused Outputs, 24VDC at 8A or 10A, Grey Enclosure

Altronix AL1024ULXPD8 Power Supply/Charger, Input 115VAC 60Hz at 4.2A, 8 Fused Outputs, 24VDC at 8A or 10A, Grey Enclosure

(No reviews yet) Write a Review

Model: AL1024ULXPD8

In Stock (leaves warehouse same day if ordered before 3pm ET)

$609.10
$469.42
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
10A
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix AL1024ULXPD8 – Frequently Asked Questions

1) How many devices can I run off the Altronix AL1024ULXPD8, and are the outputs individually protected?
The AL1024ULXPD8 breaks its DC output into eight separate fused outputs, so you can feed eight loads (maglocks, strikes, cameras, readers) from one box and a short on one run blows only that fuse instead of dropping the whole panel. The outputs are non power-limited, which matters when you are sizing wire and following the install instructions for fire alarm work.
2) What is the total current rating on the Altronix AL1024ULXPD8 power supply?
Rated at 10A. That is the figure to size against when you add up the holding current of every maglock, strike and camera on the eight outputs, and it is one of the larger capacities in this class of access control supply.
3) I only need to power one or two electric strikes. Is there a smaller alternative to the Altronix AL1024ULXPD8?
For one or two openings, 10A across eight fused outputs is far more than the job needs. Smaller options ZenSupply carries include the Von Duprin PS902 base power supply at 2A, 12/24VDC field selectable, the Securitron AQD1 switching supply at 12/24VDC 1 amp, and the Command Access PS204/204B linear supply at 2A 24VDC with battery backup. Step up to the Altronix when you are feeding a bank of doors or a camera head-end from one enclosure.
4) Does the Altronix AL1024ULXPD8 work for a motorized latch retraction exit device, or do I need a different supply?
Motorized latch retraction devices are typically paired with a supply built for that inrush, such as the BEST RPSMLR2, a power supply for motorized latch retraction exit devices. Delayed egress exit devices have their own dedicated unit as well, the BEST PS161-6, with 120V input, 12/24V output and 6A capacity. The AL1024ULXPD8 is a general multi-output 24VDC supply and charger for commercial access control, so for MLR or delayed egress hardware, confirm the device manufacturer's required supply before substituting.
5) What is the closest alternative to the Altronix AL1024ULXPD8 if I need eight fused outputs but only a couple of amps?
The RCI DKPS-2A is the nearest match on output count. It provides 8 outputs at 12/24VDC rated 2A for access control systems, versus the AL1024ULXPD8, which is a 24VDC supply rated to 10A. Both distribute power to multiple locking devices from a single enclosure; the difference is total available current, so the DKPS-2A suits a small door count while the AL1024ULXPD8 covers openings drawing a heavier combined load.
6) I only need to power one electrified lock, not a whole bank of doors. What is a simpler option than the Altronix AL1024ULXPD8?
For a single opening, a 1 amp single-output supply is the usual choice. The Command Access PS1 is a 24VDC linear power supply with 1 amp output, and the Securitron AQD1 is a 12/24 VDC switching supply at 1 amp. The AL1024ULXPD8 is built for the opposite case, feeding eight fused outputs at 24VDC up to 10A from a 120V input, which is more capacity and more distribution than one lock requires.
7) I need 12VDC at high current instead of 24VDC. What takes the place of the Altronix AL1024ULXPD8?
The Securitron AQS1210 is a switching power supply at 12 VDC and 10 Amp, matching the current class but on the 12 volt rail. The AL1024ULXPD8 delivers 24VDC at 8A or 10A. If your locks, strikes or cameras are 12V devices, the AQS1210 covers the load; if you need the eight individually fused outputs, the Altronix is the one that distributes them.
8) Does the Altronix AL1024ULXPD8 run on standard 120V building power?
It does. The unit takes a 115VAC, 60Hz input, so it lands on a normal 120V branch circuit, and it is catalogued at 120V product voltage. Output is low voltage DC to the door hardware.
9) What else gives me eight outputs like the Altronix AL1024ULXPD8, but at lower current?
The RCI DKPS-2A is the closest multi-output alternative in the catalog: eight outputs at 12/24VDC, 2A, for access control systems. Same idea of distributing to several doors from one board, at a fraction of the 10A capacity. If your total load across those eight runs is under 2A, it does the job; if you are driving multiple maglocks or a camera bank, stay with the higher-current Altronix.
10) What is the difference between the Altronix AL1024ULXPD8 and the Von Duprin PS902?
The Von Duprin PS902 is a base power supply rated 2A at 12/24 VDC, field selectable for access control, and carries a Grade 1 designation. The AL1024ULXPD8 is fixed at 24VDC with eight fused outputs and up to 10A of current. The PS902 is a base unit intended to be built up with option boards for Von Duprin hardware; the Altronix is a multi-output distribution supply and charger out of the box.
11) Are the SDC 620, 631, 632 and 634 supplies interchangeable with the Altronix AL1024ULXPD8?
They are a different class of unit. The SDC 620 is a 1 amp regulated and filtered low voltage supply with dual voltage selection, the 631 is a 1.5 amp DC power controller, the 632 is 2 amp and the 634 is 4 amp, all with dual voltage selection. Each is a single-output regulated supply. The AL1024ULXPD8 splits its 24VDC output across eight fused outputs at up to 10A, so it replaces several of the smaller SDC units in a multi-door installation rather than matching any one of them.
12) Which of these power supplies include battery backup if the Altronix AL1024ULXPD8 is not the right fit?
Among the alternatives, the Adams Rite PS-1 is a regulated 1 amp 12/24 volt DC supply with battery backup, the Command Access PS204/204B is a linear supply with 2A at 24VDC and battery backup, and the Detex 10-800 is a universal logic controller with a 120VAC/24VDC power supply and battery backup. The AL1024ULXPD8 is itself a power supply and charger, so standby batteries are wired to it; the difference is scale, since it carries eight fused outputs at up to 10A rather than one or two amps.
13) Can I use a plug-in mini supply or a power transfer hinge instead of the Altronix AL1024ULXPD8?
No, those solve different problems. The ROFU 9126T is a plug-in mini power supply at 12 VDC and 1.5A with time delay, sized for one device and not for a multi-door panel. The ROFU 10305-LA power transfer hinge is not a supply at all; it is a tamper resistant transfer rated 1.5A at 42V that carries wiring from frame to door. The AL1024ULXPD8 takes a 120V input and produces 24VDC across eight fused outputs, and a transfer hinge would still be needed downstream of it to get power into the door leaf.
14) What should I look at instead of the Altronix AL1024ULXPD8 for an access control kit or a controller-based system?
If the head end is a packaged access control kit, the Aiphone AC-PS1250 is a 12V DC 5A UL listed supply for AC Series access control kits. For a logic-driven exit application, the Detex 10-800 is a universal logic controller that bundles a 120VAC/24VDC power supply, and the BEST ELR150 is a power supply control module for electronic access control. The AL1024ULXPD8 has no onboard controller logic; it is the 24VDC power and distribution layer feeding whatever controller you install.
15) Is this Altronix supply meant for commercial access control or will it work for a house?
The AL1024ULXPD8 is a commercial-duty unit. It is an access power controller with power supply, built for professional security installs: CCTV, fire alarm and POIP among them. For a single residential door you would be well past what you need with eight fused outputs and 10A.
16) For a boost-circuit or dual-voltage requirement, how does the Altronix AL1024ULXPD8 compare to the Command Access PS210 and ROFU 9102?
The Command Access PS210 is a UL 6E/CSA linear supply with 1.5A at 24VDC output and boost circuitry for long wire runs to a single device. The ROFU 9102 is offered as the 9102-12D UL and 9102-24D with a 10/120VAC 60Hz input, letting you pick the output voltage by model. The AL1024ULXPD8 is a fixed 24VDC unit with eight fused outputs and up to 10A, so it is the choice when the requirement is many circuits from one enclosure rather than boost or voltage selection on a single run.
How fast can I get the Altronix AL1024ULXPD8 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix AL1024ULXPD8 come with a warranty?
Absolutely. The Altronix AL1024ULXPD8 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix AL1024ULXPD8?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix AL1024ULXPD8 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!