Altronix AL1024ULXPD16CB Power...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$652.28
$502.68

Altronix AL1024ULXPD16CB Power Supply/Charger, Input 115VAC 60Hz at 4.2A, 16 PTC Outputs, 24VDC at 10A, Grey Enclosure

(No reviews yet) Write a Review

Model: AL1024ULXPD16CB

In Stock (leaves warehouse same day if ordered before 3pm ET)

$652.28
$502.68
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
10A
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix AL1024ULXPD16CB – Frequently Asked Questions

1) Can I use the Altronix AL1024ULXPD16CB to power motorized latch retraction exit devices?
Motorized latch retraction devices draw a heavy inrush and are normally fed from a supply built for that duty. The BEST RPSMLR2 Series is a power supply specifically for motorized latch retraction exit devices, and the BEST PS161-6 is intended for delayed egress exit devices with 120V input, 12/24V output and 6A capacity. The Altronix AL1024ULXPD16CB is a general 24VDC 10A multi-output supply/charger for access control, CCTV, fire alarm and POIP loads.
2) What do PTC outputs mean for maintenance compared to fused outputs?
PTC outputs are self-resetting. If a circuit on the AL1024ULXPD16CB overloads or shorts, the PTC opens and then restores itself once the fault is cleared and power cycles, so nobody has to open the grey enclosure and swap a fuse. On a 16-output access control panel serving a building, that is one less truck roll per nuisance trip.
3) I only need power for one or two doors - is this Altronix 10A unit overkill?
For a single opening, yes. A 16-output 10-amp supply is sized for a multi-door system. For one or two devices, a small regulated supply does the job: the Command Access PS1 is 24VDC at 1 amp, the SDC 632 is a 2 amp dual-voltage unit, and the Adams Rite PS-1 is 1 amp 12/24VDC with battery backup.
4) Does the Altronix AL1024ULXPD16CB include battery backup, or do I need a different unit?
The AL1024ULXPD16CB is described as a power supply/charger, which means it charges a standby battery set rather than shipping with cells. If you want a supply catalogued with battery backup included in the description, the Command Access PS204/204B is a linear supply with 2A at 24VDC and battery backup, the Adams Rite PS-1 is a regulated 1 amp 12/24VDC supply with battery backup, and the Detex 10-800 Series pairs a 120VAC/24VDC power supply and battery backup with a universal logic controller.
5) Is the Altronix AL1024ULXPD16CB suitable for a commercial access control system?
Yes, it is a commercial-duty access power controller with power supply, built to feed multiple electrified openings from one grey enclosure at 24VDC, 10A. Typical use is a riser or IDF closet serving a bank of doors, plus CCTV and other low-voltage loads.
6) What else would I need for delayed egress hardware instead of this unit?
Delayed egress devices are usually powered from a supply matched to that hardware. The BEST PS161-6 is a 120V input, 12/24V output, 6 amp supply specified for delayed egress exit devices, and the Detex 10-800 pairs a universal logic controller with a 120VAC/24VDC supply and battery backup. The Altronix AL1024ULXPD16CB supplies 24VDC power across 16 outputs but carries no egress logic of its own.
How fast can I get the Altronix AL1024ULXPD16CB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix AL1024ULXPD16CB come with a warranty?
Absolutely. The Altronix AL1024ULXPD16CB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix AL1024ULXPD16CB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix AL1024ULXPD16CB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.